Pics required..

[Saloony]

Just out of interest can i have some pics of mk2 nova's hatch or whatever, with bonnet pins on the bumpers, holding them on. Lee mentioned it to me just would like to see please. If at all possible on a car that is a bit showey, i know its more of a thing for the track boys, well you get the gist. Cheers.

[chris gsi]

hope this helps

http://i45.photobucket.com/albums/f57/chris_1981/S4020598.jpg

http://i45.photobucket.com/albums/f57/chris_1981/S4020572.jpg

[Lee]

still loving the wonky holes Chris lol

[chris gsi]

i spent hours working out the best route to get cold air to the rad thats why they are not level or it could be i had my eyes closed as i felt bad drilling a gsi bumper lol

[scott.parker]

Right as i have been thinking how to do this, i want to know what do you do for the side's just use GM clips, or have you used some smaller bonnet pins?

Scott

[Mike]

Shorten down the threaded bit on a set of bonnet pins :thumb: then bolt them through the bumper bar (after youve cut the centre section out) or even remove the bumper bar an bolt it directly to the bumper mounting brackets

[scott.parker]

mike im ok on the front mate, im just wondering what others d for the side's, keept it STD or a smaller bonnet pin or something,as the STD clips are not the best things in the world lol

Scott

[Lee]

2 X self tapper :)

[Mike]

2 X self tapper :)

through the bumper onto the lip on the front wings you mean? Ive done that a lot of Nova's lol

[Lee]

Nope, track car style. Through the side into the plastic hanger on the wing.

[scott.parker]

Nope, track car style. Through the side into the plastic hanger on the wing.

Thats what i wanted to know mate.

Scott

[Mike]

Ahh i get you now Lee :thumb:

[Dar]

Nope, track car style. Through the side into the plastic hanger on the wing.
You rough pikey! :eek: