Jack Needs... rad, springs, hoses, fuel lines

[Jack]

More bits required I'm afraid lol

> Radiator and fan for a Nova GTE/GSi - sorted

> Fuel lines from a GTE/GSi - sorted

> Water pipes for an XE - Header to feed pipe, matrix to feed pipe, matrix to header tank

> Gasket that sits between the inlet manifold and intake (sfi box, or in my case the powercap) - or a part number so I can get one from Vaux

> 40mm front springs. Ideally ones for an XE, but Avo/Spax/etc will do fine. No Gmax or Pi rubbish pls - sorted

> SR (preferably) or GTE front bumper, doesn't really matter what colour as I'll be painting it black. Not really essential, but if someone has one laying around they want rid of for a few pennies I'll have it - sorted

Thank'ee :D

[gazz]

i have an old gte rad you can have rj.
if you pay postage you can have it...:thumb:

[Saloony]

What about a full, bilstien shock set with courtenay front springs?

[NOVA WHITE 1.8]

how much for the bilstein shock set n springs?

[Mike]

Jack, them fuel lines i sent you are more then adeqaute so ive been told...and i never doubt Burgo's advice TBH :thumb:

[craig green]

Jack I have an SRi rad & fan here. Similar to GTE stuff. Feel free to try it & decide if you want it. ?tenner.

I might have some of the bolts you needed for the front end. I've been putting new ones on & have kept the old ones.

[Jack]

Craig; rad and fan would be ideal. If you're coming to the cheltenham meet, do you reckon you could bring it with you? As I'm not going to be in Bridgwater for a few weeks.

Saloony; cheers but I think a full set would be a little out my price range at the mo. I should have some springs coming from ebay though so hopefully I'm ok on that front now :)

[craig green]

Will take to Cheltenham, no probs.

[Jack]

http://www.gospelcommunications.org/communique/wp-content/uploads/2006/05/514_Bump.jpg

Lee, found the bolts for the tie bar btw. They were in the box with my drill. Obviously! lol

[Lee]

lol, gayer

[Jack]

http://i13.photobucket.com/albums/a266/razorjack/Misc/bump.jpg

[Jack]

Still on the lookout for some water pipes :D

[The Simps]

Plastic pipe to bottom of rad - Nova SRi/GSI/GTE (part no. 90421716) - ?20.15
Plastic pipe to bottom of header - Nova SRi/GSI/GTE (part no. 90296924) - ?7.64
Side of head to left matrix pipe - Astra GTE 16v (part no. 90572561) - ?18.45 *
Back of plastic pipe to right matrix pipe - Nova SRi/GSI/GTE (part no. 90409850) - ?6.11
Thermostat to top of rad - Nova (part no. 90006336) - ?14.04
Inlet Manifold to T-piece near top of header - 1.5m length of 8mm ID
Top of rad (right) to top of header - 30cm length of 12mm ID

(Prices are vauxhall retail icl. of VAT)

* You need to chop about 1/2" of the matrix outlet and 1/2" of the end of the hose and the hose should then not rub on the inlet manifold.

Is correct as long as you are using this plastic pipe on the back of the block:-

http://img.photobucket.com/albums/v310/TheSimps/Nova/Nova%20LET%20Build/1803073.jpg

Simps.

[The Simps]

Some are NLS at vaux but at last you know what parts to look for from the scrappy.

Oh, also assumes you're using a sri/gte/gsi rad.