View Full Version : 1.0 clocks to sr clocks
paddy138
04-10-07, 07:08 PM
im changing my clocks on my mk2 nova from standard 1.0 ones on a 1.0 loom to what i think are sr clocks. i have one green wire left on 1.0 loom, the oil gauge is reading max, lights are working ok. but the blue light for full lights is only coming on not the dims light. anyone know where i have went wrong
paddy138
04-10-07, 08:09 PM
anyone
Dims light?
Do you mean dipped beam? I don't think there is one.
Also if you have an oil pressure gauge then their GSI items.
paddy138
04-10-07, 08:16 PM
yeah sorry dipped beam. and lights arent coming on on the dash either.
carls nova sri
04-10-07, 08:17 PM
think you must have the wires the wrong way round for the lights
paddy138
04-10-07, 08:22 PM
do you know which ones are the lights wires
carls nova sri
04-10-07, 08:24 PM
no its just try and error till you get them right
Shaun_O'Donnell
04-10-07, 08:34 PM
Trace the wires on the track to see where they go and compare each set of clocks, sometimes it's not just a case of matching wire colours.
I am looking at the back of my 1.0 clocks and the clock bulbs are run off the 4th wire down on the left being positive and the top right being the earth.
http://i73.photobucket.com/albums/i203/Shaun_ODonnell/STA60049.jpg
Hope this helps.
paddy138
04-10-07, 08:35 PM
:thumb:
Shaun_O'Donnell
04-10-07, 08:41 PM
Just checked again, the R/H 2nd from bottom wire is also the dash bulb positive, it solely supplies the furthest most R/H bulb.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.