removing

[Matt Finary]

How do I remove the slam panel without causing damage to the other panels?
how do I remove the seam sealant?
what do I use to reseal it?

cheers

IF IT'S STANDARD, CHANGE IT!

[Doddy]

easiest way to remove the slam panel is to get at angle grinder(bigger the better)and just chop it into pieces, so you can get to the spot welds easier. you can either drill out the spot welds or grind them out.

There is a special tool for removing seam sealant, i have never seen one, but i found a wire brush end on the grinder worked well. its slow work, but it works..

[Matt Finary]

thanks


IF IT'S STANDARD, CHANGE IT!