View Full Version : Jack Needs: Mount, linkage, pulley, oil filter adapter
Help me actually do something worthwhile to the shed!
I am needing the following parts:
> Rear gearbox mount, from a Nova. Sorted
> Gear Linkage. Sorted
> XE Inlet Cam Pulley (only need inlet, but will settle for a pair lol) - thats for an early round tooth engine btw.
> Oil filter adapter for an XE - the bit that replaces the oil cooler connections.
> Bolts to put the bottom pulley on with, or at least advice on what ones I need for that (drilled the old ones off!). Sorted
I'm in Somerset, but could collect from anywhere between Yeovil and Cheltenham, within reason. Or I'm quite happy to pay postage costs.
Ta muchly :D
Jeff16v
18-09-07, 02:25 PM
Bolts for bottom pulley, i just got some.
http://www.migweb.co.uk/forums/items-sale/331336-stainless-steel-pully-bolts-xe-let.html
scott.parker
18-09-07, 02:49 PM
jack mate ive still got my XE inlet here if you ant it?
Scott
jack mate ive still got my XE inlet here if you ant it?
Scott
Inlet cam PULLEY lol
scott.parker
18-09-07, 03:33 PM
Well i read it as inlet and a cam pully, as he's put only really need inlet? lol
Watch it or ill post a pic of a standard gsi s'wheel lol
Well i read it as inlet and a cam pully, as he's put only really need inlet? lol
Actually I only put "cam pulley" lol
Jeff, that link is ideal, cheers :thumb:
http://upload.wikimedia.org/wikipedia/en/thumb/0/07/Mr._Bump.jpg/200px-Mr._Bump.jpg
http://fotofon.cathexes.net/archives/bump02.jpg
scott.parker
24-09-07, 10:08 PM
Jack do you have a samwich plate addaptor for a oil fillter?
And you want to take this out of your system?
Scott
No, he has an oil cooler and needs the threaded sleeve that allows you to remove it and run without the plate. I think he has ther part number for it now to get it directly from vaux.
I WILL hang the damn thing in there next weekend!
Isn't that the bit that scott wants though? He wants to fit an oil cooler, not remove an existing one?
I've got the day off wednesday to do the rocker gaskets on the Celica, so will probably wimble down to Vauxhall after that and see about getting that part. Then it'll just be a case of inlet cam pulley and we'll have what we need :D
Philsutton
25-09-07, 10:04 AM
pm sent :thumb:
90144360 part number for the threaded bit for oil cooler. its five quid . any dealer will have it in 2 days! just got mine yesterday
scott.parker
25-09-07, 06:12 PM
Isn't that the bit that scott wants though? He wants to fit an oil cooler, not remove an existing one?
I've got the day off wednesday to do the rocker gaskets on the Celica, so will probably wimble down to Vauxhall after that and see about getting that part. Then it'll just be a case of inlet cam pulley and we'll have what we need :D
Yep you got it Jack, i have a cooler and piping,but no sanwich plate..
If it's going for next to nothing i'll give it a home..;)
Scott
Philsutton
25-09-07, 10:53 PM
any dealer will have it in 2 days! just got mine yesterday
took about a month to get some in at our local one, bit hit an miss sometimes with Vauxhall. They retail at ?5.10 + VAT here as well.
I have an early inlet cam pulley if you haven't sorted one. ?5 plus p&p?
Ill have to check the condition of the plate scott, the engine was from a scrappers so you can imagine how they disconnected everything lol
Lee (H), thanks for the offer, but I should be sorted now - Phil's fixing me up with the rest of the bits.
Cheers all :thumb:
Lee, what you up to next weekend? :p
You know what im up to. Be at yours for around 10 Saturday :)
hendrix
28-09-07, 10:02 AM
Jack I think Ive got the pulleys if you still need them??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.