guide

[cooltom31]

anyone know where i can get a guide for fitting a digidash? tried google and nothing comes up.

cheers.

[Spudly]

*Edit removed link as its no longer active,

Not too sure where ya can get one from mate as i had one from nova-land but the sites not there anymore now!!

[carls nova sri]

i know that a couple of people have got them on here but carn't remember who will try and find out for you

[tom_beverley]

Here (http://www.pngclub.com/forum/showthread.php?t=61929&highlight=digi+dash+diagram) is a wiring diagram and bit of info

[cooltom31]

yeh i have seen that, but was just stuck on how to wire in the indicator lights and the speedo, where do the brown and black wires go to from the sender? also my rev counter doesnt seem to work.

cheers

[Adam]

Black is Ignition live, brown is earth.

What engine is it? Is there a green wire in the dash loom?

[cooltom31]

its a 1.6 with t40 carbs. the green one as in the rev counter? so where do i wire the ignition live and earth to?

cheers.

[Nick]

erm... ignition live and earth

[cooltom31]

didnt ask for sarcasm but iv never wired anything in my life apart from speakers so dont know what im doing. thanks for the help anyway.

[Nick]

It's not sarcasm... You wire the earth, to earth. And the Ignition live, to the ignition live.

[tom_beverley]

Not been funny but it was pretty obvious!

How have you been getting along with it? IIRC the rev counter is a green wire, if its still not working then you may have to run another wire from your coil to the dash. If you follow the diagram you shouldn't really have any problems, but in future, topics like this should also be in the technical section.

[cooltom31]

i now have the sender in but its telling me the wrong speed, tells me about 20mph when im doing about 60, and the rev counter isnt working and the backround isnt lighting up so im thinking the bulbs are gone.