310mm 4 pots

[wilson_sri]

Under 16" speedlines? Fit ok? Won these 310mm wilwood 4 pots off ebay

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=130146175363&ssPageName=STRK:MEWA:IT&ih=003

Asked the guy if they fit under 16s, he assured me they do. Just wanting to double check with you guys :thumb:

[macc nova]

yeah they will im pretty certain they fit under 15'' aswell

[wilson_sri]

Excellant! Thought they would but just wanted to make sure, cheers mate.

[blue_peg_16v]

not sure they will go under 15s ive got 280 with willwood dynalites and they are starting to get close when i put the 15s on would think the 310s would go under 16s but might depend on the wheel, as with mine my 15s fit with out spacers as do a set of 17in multi spokes i have but my kahns need 10 mm spacers and all 3 sets have a 45 mm ofset the spokes on the kahns ar too wide and catch the caliper

[krobinson]

They wont fit under speedlines unless you space the wheel out, or get deeper bells and brackets to move the caliper back.

Keith

[Big_Chap]

it'll be tight!

went through this problem myself last year, ended up with 2 sets of 4pot brembos at one point!

here are mine at 310mm iirc.


http://img.photobucket.com/albums/v82/Big_Chap/17022007003.jpg
http://img.photobucket.com/albums/v82/Big_Chap/17022007005.jpg
http://img.photobucket.com/albums/v82/Big_Chap/17022007006.jpg
http://img.photobucket.com/albums/v82/Big_Chap/17022007008.jpg


depends on a few dimensions, the thickness of the bell (will need to be around 35-40mm iirc), the overall profile of the caliper (the face where it says "wilwood" and the face where the retaining clips fot the pads are)

[wilson_sri]

Did you have to fit spacers big chap?

[Stoo]

Nice Brakes Big Chap ;)

[Big_Chap]

Did you have to fit spacers big chap?

yeah, i trial fitted them with 5mm's but reckon i could get away with 3mm, oh, and my speedlines are et45! :eek:


Nice Brakes Big Chap ;)

cheers mate, got them from a guy who looked a bit like gary barlow from take that...lol

[wilson_sri]

So try 3mm spacers first and if that fails go for 5mm?

[Stoo]

cheers mate, got them from a guy who looked a bit like gary barlow from take that...lol

Hey!! Fukk you :D

[Big_Chap]

So try 3mm spacers first and if that fails go for 5mm?

yeah but it also depends on your caliper profile although yours look slim so should be ok, trial fit them asap that way you have time to change your wheels/brakes etc if they don't fit. i was gonna go for comp mo's if it was bad, probably the best spoke clearance around

[blue_peg_16v]

yeah, i trial fitted them with 5mm's but reckon i could get away with 3mm, oh, and my speedlines are et45! :eek:



cheers mate, got them from a guy who looked a bit like gary barlow from take that...lol

i needed 10mm ones for mine tried 5mm but didnt fit

[Big_Chap]

i needed 10mm ones for mine tried 5mm but didnt fit

yeah but i'm talking about my brembo's :thumb: