tracking help

[ianwood]

i've noticed my car was pulling to the left on acceleration so i stuck it on the ramps and noticed that my toe settings we're out but i've run in to problems i can't get the lock nut to back off cause the threads are rusted i've tried brut force and wd40 any other suggestions :(

[Dicko]

take it to a garage to get it done, then if they break anything its there fualt :)

bloke who did mine used a spaner, and a very long extension bar over the end, some WD40, and alot of noise, swearing, sweat.

have u tried all of those yet ;)

[ianwood]

definatly alot of swearing and sweat i'll try the long spanner because i well skint at the moment;)

[Toby]

Use a blow torch on the nut to 'gently' heat it up, being careful not to heat up the thread in the process.

Toby

[ianwood]

as advised i heated up the nut and guess what it worked :) cheers guys for the advice