View Full Version : efi
philthepill_389
30-08-07, 09:07 PM
hi wondering if anyone can help on the back of an efi injection system there is two petrol pipes one is a return what is the other one for is it a breather and were dose it go
thanks any info
hi wondering if anyone can help on the back of an efi injection system there is two petrol pipes one is a return what is the other one for is it a breather and were dose it go
thanks any info
One petrol pipe is a feed, the other is a return.
philthepill_389
30-08-07, 09:20 PM
yea but dose the feed not go throw the regulator then out the injection rail
thanks
General Baxter
30-08-07, 09:23 PM
return pipe fits onto the reg
philthepill_389
30-08-07, 09:32 PM
so whats the other pipe for next to the feed it about 5 mm above it they look the same
thanks
philthepill_389
30-08-07, 10:10 PM
any one with more info thanks
Are you on about the engine? or the fuel tank?
philthepill_389
31-08-07, 07:40 AM
the engine side of things
there are two fuel lines feed and return
were do they connect to the injection system
0ne goes to the bottom of the reg (Feed OR Return)
and one goes to the back of the efi (Feed OR Return)
but theres two pipes comin off the back of efi?? (Which pipe is it)
which one do i use and what the other pipe for?? (Is it a breather)
many thanks phil
philthepill_389
31-08-07, 08:05 PM
right got some pics now to help yous help me with my problem
http://i153.photobucket.com/albums/s233/GSiiiii/31082007020.jpg
in the picture above were its marked in red dose the return fuel pipe go onto there ??
http://i153.photobucket.com/albums/s233/GSiiiii/31082007019.jpg
in the picture about were its marked in red dose the feed fuel pipe go on there ??
and what is thr pipe marked in green is this a breather and were do i join it to ??
thanks very much phill
well, that looks like an aftermarket manual pressure valve to me.
It is not standard.
philthepill_389
31-08-07, 08:47 PM
i know its not standard just askin were the fuel lines connect
thanks
philthepill_389
31-08-07, 10:14 PM
so can some one help me
philthepill_389
01-09-07, 05:00 PM
anyone please
thank you
The feed goes to the end of the rail.
The return comes from the regulator.
To fit that c**p fse valve you put one pipe to the end of the standard rail regulator, and the other from the fse to the fuel tank.
That top pipe is a vacuum pipe.
philthepill_389
01-09-07, 05:19 PM
so whats the spare metal pipe that comes out the back of the efi marked in green on the pic were dose that go and do i need to put a pipe on it thanks for the help so far
thanks
No idea mate.
Where about is it on the engine?
philthepill_389
01-09-07, 06:32 PM
its just on ther back of the efi directly above the petrol feed pipe its got me well confussed fitting engines is easy getting them running is hard lol
thanks
I see the problem now.
Somones removed the standard regulator.
It should look like this, with the return pipe on the right hand side(under the reg)
http://img.photobucket.com/albums/v86/Nova-crew/Rail.jpg
I would therefore block that pipe off, and put that fse valve to the silver pipe on top of the rail
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.