Results from the RR Day?

[Will F]

Where are they?
I have seen a few random figures squirted around (well done Oli D)

But not the comprehensive list... is it just Phil being a lazy t*at? lol

[dhdev (Oli)]

Cheers Will.

Here's the graph from mine to get the ball rolling.

http://i41.photobucket.com/albums/e296/dhdev/DSC00875.jpg

[Stuart]

ummmmm naughty.... Phil get the RR calibration sorted out.

5252 is the magic number ;)

[dhdev (Oli)]

ummmmm naughty.... Phil get the RR calibration sorted out.

5252 is the magic number ;)

tut tut Stuart. The lines will cross at 5252 if the scales on the two y-axis were the same ;)

[Stuart]

ffs thats even more annoying that not having a RR setup right lol

when will RR's learn to plot them on the same fricking scales :D

[Adam]

I got 118hp @5800 ish rpm, and 110lb/ft, X16xe
Pretty much as expected, 106 as std, i have a set of mild kent cams, decat and full 2" ashley system.
Will put the graph up when im home.

[craig green]

I'm interested what Phil Lofthouses got. Anyone recall?

[Adam]

201@ the fly iirc.

[John]

mine ran 152bhp, pleased with that for what is essentially a standard xe, with over 100k on it.
Torque curve is all over the shop though, probably down to the powercrap, and standard 1.2 centre section lol, BUT i'm no expert.

[Adam]

Is that just a backbox you have fitted John?

A tiny 1.2 system will no doubt be holding it back, small pipe bore.

Btw, you had a touch of black smoke out the exhaust when booting it on the a50 ;) It kept getting sucked in through my heater vents lol

[justnovas]

full list of power at wheels
sorry it is only reg

K482 HUB 103BHP
B571 HTV 132BHP
K862 ARW 168BHP
K648 JJX 145BHP
K688 XOE 170BHP
J875 FGD 175BHP
K690 BUJ 375BHP
K485 UKJ 522BHP

[John]

Is that just a backbox you have fitted John?

A tiny 1.2 system will no doubt be holding it back, small pipe bore.

Btw, you had a touch of black smoke out the exhaust when booting it on the a50 ;) It kept getting sucked in through my heater vents lol

yeah it just has a back box, and standard 1.3 centre sectionlol, when i have some time/money i'll probably take it somewhere and have a custom c/s made. Been dealing with jp on a customers car at work, and i'm quite impressed with their work.
I'm guessing it's fuel smoke ad? as it never burns any oil, it desperately needs the fuel pressure checking/adjusting as it's never been done. Plus it's only done a couple of hundred miles since fitting. oh and that large boot down the a50 was the first time i'd opened it up that daylol

[Adam]

Yeah mate it was just a touch of black fuel smoke. It really shifted on the a50, left me standing lol

[Mike]

i reckon if id actually gone, i would have made 90bhp hahaha

[Philsutton]

The results above are what was written on the board next to the computer that was recorded as we did them. The reason why the torque / power scales are different is down to Paul as I was doing the runs an he was on the computer and he got smashed up the night before an wasnt with it lol. Also after most people left we had a big barricuda on that only made about 200bhp but sounded amazing.

[freeman88]

what do u think my std 1.2i lux plus has lol ?

[Philsutton]

about 35bhp if its lucky lol

[Adam]

Mine
http://img.photobucket.com/albums/v86/Nova-crew/160016vrrprintout-JNC-12_08_07-resi.jpg

I also put the figures into excel and made a new graph which share the y-axis values, and look where they cross ;) Pretty much bang on 5252, probably tiniest amount off the value due to me having to draw a line across the graph to "guess" the value from the old axis.
http://img.photobucket.com/albums/v86/Nova-crew/RollingRoad-CorrectedAxis.jpg