View Full Version : twin 40s throttle cable
azz/andy
07-08-07, 09:03 PM
hi im trying to get my throttle cable an linkage set up on my new 40s but really struggling has anyone got any usefull info or pics to help please
azz/andy
07-08-07, 09:08 PM
also ive got a facet fuel pump fitted will i need a regulator with this? cheers
Struggling with the linkage, how?
Yes you'll need a reg set to about 3psi.
azz/andy
07-08-07, 09:28 PM
im fitting them to what was a gsi can i use the same throttle cable? think i had my carbs on the wrong sides the linkages were on the outside of each carb, lookin at it again i think they may join together in the middle
azz/andy
07-08-07, 09:30 PM
where could i get a regulator? couldnt i have just used my gsi fuel pump with a regulator insted of buying a facet pump. cheers for helpin
The lever joins in the middle of the carbs yes.
You can use a gsi throttle cable, with the ball-end cut off.
You can get a universal 1m carb for about ?3 tho.
Yes you could use the gsi pump, but would need wire it to a switch, and get a regulator that can cope with 45psi.
azz/andy
07-08-07, 09:37 PM
would it be better to just use the facet pump then? do you know where i could get a reg for a facet pump?
Eurocarb/FastRoad cars on ebay sell regs.
Facet pump is lower pressure so suits carbs better, so use that if you have one.
azz/andy
07-08-07, 09:45 PM
thanks for your help mate
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.