PDA

View Full Version : 14sr into a 13sr


Anonymous
31-03-02, 03:52 PM
My 1300 is about to give up on me and i've sorted myself a 1400. I'm thinking its just gonna be a straight swap. is that right? Does anything need changing? extra bits needed? Its a 1988 car if that makes a difrence
Anonymous
31-03-02, 04:52 PM
you will need the engine wiring loom from the 1400 if the distributor and coil are different!! they sometimes have different plugs on them!
the rest should be pretty much the same!
Anonymous
31-03-02, 07:09 PM
yeh mine had that done by just novas....it was apparently a easy thing to do...supose it ent gonna be much different is it....the power is better tho....get a 32/34 webber on it and do away with that peiburg if its got one...no good!
Anonymous
03-04-02, 12:11 PM
why bother a 1.3sr lump is more powerful! 80bhp to the poxy 60bhp you get from a 1.4!!
if your gona swap get a 1.6gte or GSI 1.4 not worth it to little power for alot of work!
Anonymous
03-04-02, 12:34 PM
1400 sr is more powerful than the 1300 and has more torque

the spi 1400 is 60bhp the carb models are 72bhp
Anonymous
03-04-02, 05:39 PM
1.2i/1.0 45bhp
1.2carb 55bhp
1.4spi 60bhp
1.4td 68bhp
1.3carb 70bhp
1.4carb 72bhp
1.4mpi 82bhp

16v Engine fitting and advice... mail me for a quote :D
special rates for girls!!
Anonymous
06-04-02, 11:58 PM
you will need the coil and the small loom that goes from the coil to the dizzy off the 1.4 aswell, make sure you get them or you gonna be fcuked m8. at the moment you will have a black block connecter going to you coil with 2 wires on it black and green, on the 14 coil loom it will have 3 wires on it black green and brown put the brown to an earth piont and connect the green to your green wire and black to the black wire, job done p!ss easy job

web site: www.perpetualbliss.net
E mail: v5uk@perpetualbliss.net