Are 32/34 carb's Easy to fit?

[Anonymous]

I have a 1.2 with piper cam,magnex system and want to know how hard it is to fit a webber 32/34 carb?I have the 1.3sr inlet mainfold!just need to knoe how easy it is as have had laods of prob's setting my standard on up!(might be cause 15years old though)It runs fast when warmed up but needs 3-4mins when start up or will stall every time stop!
It is a real bitch taking the inlet mainfold off as bolts on there so long!wll they go straight one?

[Anonymous]

not hard if you get the conversion plate i didn't and made my own only had a couple of probs with the gaskets soon sorted them though and you have to fit a " T " piece in the fuel system to cut the pressure to the carb down, mine was running really rich till i did that bit works great and halved my fuel bill

http://uk.briefcase.yahoo.com/kf139

[Anonymous]

Did you get extra power as well?as that's what Im after for the old M1 trips bk and forth from UNI!

:D

[Anonymous]

could A compleat novice put it together and set it up?

I have played about with the pierburg oner i've got and taken one off and back on so do you think i could do it!?

[Anonymous]

yes m8 you can do it as long as you get the plate to convert it though, and yes the power gains on mine are superb the first time i drove it it was like a different car

http://uk.briefcase.yahoo.com/kf139