View Full Version : how strong are cam belts??
very it seems lol
http://i12.photobucket.com/albums/a226/sclurgess/17-07-07_1836.jpg
http://i12.photobucket.com/albums/a226/sclurgess/17-07-07_1835.jpg
http://i12.photobucket.com/albums/a226/sclurgess/17-07-07_1834.jpg
oh and can anyone spot anything they want before that shell goes to the scrap yard in the sky?
LMAO, nutta lol
It dont have an injection fuel tank does it?
**** yes, must remember to take that off as i need it :P
General Baxter
17-07-07, 07:15 PM
can you chop the loom from the bulk head :)
gammienov16v
17-07-07, 07:15 PM
its a nova lifting belt nowlol
can i have the boot lifter inc the bolt things, and a speedo cable if its still there?
bangerbrian
17-07-07, 09:02 PM
what wrong with that shell?
what wrong with that shell?
Front panels bent lol
Front panels bent lol
LMFAO! Theres no cambelt either lol lol
from bulkhead back??
yes i still have the lifter and speedo, ill get them sorted for ya
and yes front panel is abit bent, but i stood on it to make sure the bonnet shut again. other than that i dunt want it lol
General Baxter
18-07-07, 07:36 AM
im after the complete loom in the engine bay ;) id ask for the complete thing but im thinking you wont be ****d to get it all lol
you wanted a mk1 loom tho didnt ya
General Baxter
18-07-07, 04:44 PM
i can mod to fit lol
Sirnixalot
18-07-07, 05:39 PM
you keeping the front lights? im after the indicators as someones kicked mine in :mad:
Can i have the glove box door please Burgo as mine is in two bits. Plus i will sign my track cars roof as a thank you note to your self.
Off out in a bit please pm me thank you.
errrr ill have to have a look at the glovebox, cant remember what its like lmao. and yes i will sort the indicators out
there is actually like a list as long as my arm that i need, but i thought thatd be taking the piss lol
basically its all lilttle bits i cant be ****ed to go routing round the breakers for:
-rear seat side mounting bracket, little white semi circle things, black metal plate and screw, from drivers side.
Some grey push-clip (very technical lol) things that hold on the parcel shelf suppors, bottom or rear door cards, boot panel etc.
Headlight switch
In the engine bay:
On the bulk head theres little black screw things where the brake lines clip into, need a few of these.
Drivers side front, metal (green) brake line
Header tank
If interiors shi.t, a set of grey mk2 headrests and the support things?
The pin and clip from the back of the brake servo.
That ok?
Thanks a lot mate
Paul
oh this is really pushing my luck ,but what about a lockset drivers door lock , petrol cap, boot lock and igntion barrel, and keys?
lmao errr ok altho the pin and clip has already been taken lol
oh errr ive got the locks but they would be the same as mine as i have got the ignition barrel on me saloon lol
bollocks that means iv got removed all the **** and lie int glass/rainwater, cheers mate
you dont have to get it all, or any, but obviosuly if you do ill sort you out.
Paul
Thats cool just let me know once you know thank you
Chris
coombsey
19-07-07, 10:00 PM
can i have the cam belt
but seriously ineed the actual lock that holds the door shut drivers let me know thx
Ok, I've found aheader tank servo pin and clip and a enough of the grey push clip things.
This is a bit dodgy I know but i have got a key for the igniton, so if your willing to share keys with me feel free? lol
This is turning into a bit of a vultures thread lol
Have you got the arm that connects the door to the frame, and holds it open? Missing them on mine, so the doors keep closing on me lol
yes ill wip them off aswell lol
ive_had_a_novadose
20-07-07, 02:42 PM
incoming another vulture lol have you got the speedo i only need the actual speedo not the whole dials as mine says im doing 80 when im doing 30 lol also is it black faced and working properly as far as you know.
cheers
:thumb: You want anything for them?
so any news on the parts yet bud ?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.