View Full Version : 32/34 weber carb - fitting?
lee_edwards
12-07-07, 06:57 AM
hi well mine should arrive today with a weber manifold.
whats exactly needs doing to fit? any extension to the throttle cable?or the water fitting that bolts onto the side of the pierburg?
thanks lee
should just bolt on. You'll need to remove the studs from the top of the inlet, a good set of molegrips should do that. Not sure about those hoses think they get joined together.
GRUNT 16V
12-07-07, 03:06 PM
follow the instructions supplied easy as 123 BIG !!notice if you have a pieberg 2e3 with a KN air filter DONT!! fit it as this will damage the Nova bonnet by denting it!! . Fit a pancake type filter from weber or buy the specific one for the weber from KN
You'll need a manual choke cable too.
craig green
12-07-07, 05:17 PM
Another common query is with the return fuel line. The carb has a return but the car doesnt. 'T' the return hose off the carb into the feed line.
lee_edwards
12-07-07, 06:58 PM
thanks lads..
one thing my car has got a fuel return.
Yeah, so just t it into the feed line. Altho some people just block the return off.
Craig means the other way round, the car has a return, the carb doesn't.
lee_edwards
12-07-07, 07:17 PM
ah rihgt kool...
do i put the T between the pump and the carb?
didnt arrive today :( - hopefully tomorow
ednovasr2
27-03-09, 02:11 PM
mine has a auto carb on now but was a one point a 1.2 with manual choke plus fuel return. I'm getting a 32/34 off the bay but no plate how do I make one?
you can contact weber and get a replacement - www.webcon.co.uk
ednovasr2
05-04-09, 09:36 PM
yeah that will be chap!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.