PDA

View Full Version : wireing help needed..please


gazz
10-07-07, 08:30 PM
Help required please:i'm fitting a set of twin 45's on 20xe in a nova 1.3 sr shell. What i need help with is the wiring to connect the coil up..
i have the loom for dizzy set up..
i have 3 wires coming out the dizzy loom..
GREEN-BROWN-BLACK
and on the car loom..
BLACK-GREEN
what connects to where?
Adam
10-07-07, 09:41 PM
Connect the black to black.
But then connect the brown to a earth.
Green to green.

If the revcounter dont work, send the green directly to the rev counter.
gazz
10-07-07, 09:45 PM
what connects to the coil?
Adam
10-07-07, 09:47 PM
It should have its own mini loom, with a plug that goes to the coil.

Any pics of the setup/?
gazz
10-07-07, 09:54 PM
the plug has been cut off that connects to coil end..
here is only pic i have

http://i157.photobucket.com/albums/t60/gazzgsi/c26f_12.jpg

got the 2 plugs connected on to dizzy and the module..
Adam
10-07-07, 10:00 PM
Hmmm, the module needs power from somewhere, looking at that loom you just have the coil plug missing with brown,green,black on?
gazz
10-07-07, 10:03 PM
the green brown and black wires are there just hard to see..:thumb:
i've extended them now.just dont know where to connect them
Adam
11-07-07, 12:24 AM
If you connect those to the coil, how will it get power, as they will have no physically connection to the car loom.
I was going suggest wiring those 3 into your car loom, but then your left with no connection for the coil.
gazz
11-07-07, 10:54 AM
here is a pic with plug fitted on one..
that is what i'm trying to make but dont know what wires go where..
http://i157.photobucket.com/albums/t60/gazzgsi/b319_1.jpg
Stuart
11-07-07, 12:11 PM
that looks like a GTE/GSI setup... ie a pretend dizzy... as the 1400 one i fitted had a 4th connector that went to the coil...
Adam
11-07-07, 06:26 PM
here is a pic with plug fitted on one..
that is what i'm trying to make but dont know what wires go where..
http://i157.photobucket.com/albums/t60/gazzgsi/b319_1.jpg That plug in the middle, looks like the wires are spliced to the coil, with the plug plugging into the car loom.