View Full Version : wireing help needed..please
Help required please:i'm fitting a set of twin 45's on 20xe in a nova 1.3 sr shell. What i need help with is the wiring to connect the coil up..
i have the loom for dizzy set up..
i have 3 wires coming out the dizzy loom..
GREEN-BROWN-BLACK
and on the car loom..
BLACK-GREEN
what connects to where?
Connect the black to black.
But then connect the brown to a earth.
Green to green.
If the revcounter dont work, send the green directly to the rev counter.
what connects to the coil?
It should have its own mini loom, with a plug that goes to the coil.
Any pics of the setup/?
the plug has been cut off that connects to coil end..
here is only pic i have
http://i157.photobucket.com/albums/t60/gazzgsi/c26f_12.jpg
got the 2 plugs connected on to dizzy and the module..
Hmmm, the module needs power from somewhere, looking at that loom you just have the coil plug missing with brown,green,black on?
the green brown and black wires are there just hard to see..:thumb:
i've extended them now.just dont know where to connect them
If you connect those to the coil, how will it get power, as they will have no physically connection to the car loom.
I was going suggest wiring those 3 into your car loom, but then your left with no connection for the coil.
here is a pic with plug fitted on one..
that is what i'm trying to make but dont know what wires go where..
http://i157.photobucket.com/albums/t60/gazzgsi/b319_1.jpg
that looks like a GTE/GSI setup... ie a pretend dizzy... as the 1400 one i fitted had a 4th connector that went to the coil...
here is a pic with plug fitted on one..
that is what i'm trying to make but dont know what wires go where..
http://i157.photobucket.com/albums/t60/gazzgsi/b319_1.jpg That plug in the middle, looks like the wires are spliced to the coil, with the plug plugging into the car loom.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.