View Full Version : tranducer help needed
Taz7970
06-07-07, 04:10 PM
will some please tell me exacly where to transducer goes and how to fit it?
thanks taz
spunkymonkey
06-07-07, 04:31 PM
will some please tell me exacly where to transducer goes and how to fit it?
thanks taz
Just follow the speedo cable into the gear-box.
I've just told you how to wire it in your other post.
Taz7970
06-07-07, 05:14 PM
sorry didnt read it properly am i write in saying im gonna need more than 5 inch's of cable coming out the tranducer as thats all ive got.
Yeah, just extend them with extra wire soldered on to them.
I took my ignition live from the back of the fusebox, grounded it behind the dash (only accessible with the dash off), and obviously took the speedo sender to the dash. I took them through the hole left by the original speedo sender.
staggy_gsi
06-07-07, 06:43 PM
sorry to hijack, but can you tap into the live and earth to the clocks for the transducer? or is it best to do it as above ^^?
Yeah you can do.
But the clocks Ignition live has quite a lot of strain on it with a digidash fitted(4 wires going to 2 thin wires......)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.