xe engine loom

[sr_nova_joe]

hi all, just wondering does a astra gte wiring loom be the same for a later calibra redtop,i herd the loom will fit any redtop just need 2 double check, cheers
joe

[Adam]

Later XE's had different management/loom.

[Paul]

You mean by dis-pack instead of dizzy there Ad?

[Adam]

Yup

[craig green]

Late XE (dispak) will have an inlet air temp sensor in the inlet trunking too, so theres another sensor + 1 or 2 of the other sensors are 3 pin instead of 2 pin on the earlier loom.

Does the GTE loom have lambda? The late one will definately but only later GTE's had this.

[Philsutton]

the gte loom is different to the cavs / calibra regardless of dizzy / dis pack style engine.

However it doesnt mean it wont fit a another xe with the correct ecu

[damian4066]

hello mate dont try putting a earlier loom on a later engine,it just won`t work,pre 92`use the coil for the spark where as the later has a crank sensor to mentain the spark,if you got the later calibra engine approx l-reg onwards,it`s probably dis ignition,so you`ll need a later loom..lots of ways to do it ,but chose the right way,bodging can cause fires...lol..