Removing the bulkhead

[tom_beverley]

Any info, pics of the process, how far down to grind etc as I'm seriously contemplating removing the bulkhead.

Was stripping the car last night and preparing for relocating the battery and found loads of silicone sealant up at the top of the passengers footwell.... A few prods and harsh words and discovered it to be a bloody bodged up rust hole by the previous owner :mad: Why can't some people fix things properly :mad:

Anyway got the drill and wire brush out and its turned into a 8"x1" hole now.

[Iain]

This post by Tom Reid may help (http://www.pngclub.com/forum/showpost.php?p=663368&postcount=45)

[Adam]

Also, keep the wiper motor mount if you have the original nova wiper motor/linkage.

[dan23]

if you veiw my profile an reaed through my threads ,i started a thread about this
i got some good advice an a lots helpfull pics

[tom_beverley]

Thanks for the help, much appreciated!

[loggyboy]

www.loggyboy.com/images/MeritMk2/Bulkhead (http://www.loggyboy.com/images/MeritMk2/Bulkhead)

[burgo]

Also, keep the wiper motor mount if you have the original nova wiper motor/linkage.i found using a corsa wiper motor and linkage works very nicely with the bulkhead removal