will my drive shafts fit ???

[hurcombe_nova]

people say that when fitting a redtop engine in a nova u need 22 spline shafts that come in nova gsi so gsi is f13 gearbox and so is my corsa sri 1400 8v so will them shafts be ok to use or ???

[Lee]

You need 22 spline inner CV's from a MK2 Cav 1.6. They will enable you to use the Nova shafts and outer CV's with an F20.

[hurcombe_nova]

no i meen will the shafts in my corsa be ok to use with a redtop engine and also are they 22 spline

[Lee]

sorry, my bad. Same applies though, you need to change the CV's if you use the corsa shafts, but you can also use 2.0 shafts straight on with 2.0 hub conversion, as the corsa tracks wider.

[mayhem]

corsa shafts are longer than nova shafts, about 3cm.

[Ste L]

can use cav/cali/astra mk2 shaft's on corsa,

then get the hubs on the same machines to accept corsa barring or golf syncro rear one's

i think thats right.. or something along them lines

[Chris Astley]

You will need corsa gsi shafts for your corsa then change the inner CV joints.

Chris

[mayhem]

yup. or take 2.0 shafts and make m shorter.