View Full Version : Small block tuning bits-T40s,Ast2,4-1 manifold,Ashley exhaust,Sri head etc
Everything available week after Pv.
You can inspect/ask questions about them at pv if need be. lol
Anyways.
*Adjustable Fuel pressure regulator, suitable for mech pumps/spi pumps-?15 inc delivery
"Kent AST2 camshaft-Done about 1000miles in my engine, around 6000 in total. Great condition, no wear etc-Prov sold
*14se(nova SRi) cylinder head-Great upgrade for 1400 engines, round ports, large valves, adds around 8-10bhp over std 1.4sr head) Complete with valves, lifters, rockers etc-?Prov sold
*Full Ashley exhaust system-To suit mk1 SR model,2" bore, 3" ss tip good condition, no holes, sounds mint-?75 inc delivery
Also have Nova 1.4sr std cam, gte std cam, 1.4 fuel pump, spi dizzys, cam housings, 1.2 cylinder heads, 1.8 spi throttle body etc etc. Ask for more info lol
ANDYRACER
29-05-07, 08:05 PM
Cam mine!!! :D
i want the 40's but dont have any use for them at all... oh well lol.
coochiSR
29-05-07, 08:41 PM
Ad, might be interested in Kent AST2 cam mate, we spoke ages ago bout it, you was supposed to PM when you decided ;).
****e mate, forgot that,sorry :(
Think andy wants it now
Cam possibly sold to Andy.
Lee-1984
30-05-07, 02:24 PM
*Twin Weber 40 DCOE carbs, good condition, could do with a service kit as a few of the o-rings have gone a bit hard
Will come complete with Round Port inlet(to suit sri/gsi/gte), alternator lowering bracket, throttle linkage with cable, and adjustable fuel pressure regulator. Jetted pretty much spot on for a 1300/1400 8 engine(run fine on mine) ?260 inc delivery
i want these, but not sure if ill have the money till end of june
im interested in a few bits pal, will discuss at PV ;)
i want these, but not sure if ill have the money till end of june
They have to go before the end of june mate, car insurance is out on 20th June, and the money for it is in these carbs selling, Lol.
No probs draper :thumb:
3rd dibbs on cam??? lol
probably have that ignition setup off you tho.
I'll ask andy later if he deffo wants it.
Sorry to let a few people down :(
Lee-1984
31-05-07, 12:29 AM
dependin how much money got left out of wage's tomorrow maybe able to have 40's off you then, but eva way ill let you know,
cheers
lee
EVERYTHING now available, engine will be removed tomorrow.
Exhaust, ignition setup etc is removed.
The AST2 is back for sale, Coochi? Novapilot?
dj_wudgey
06-06-07, 12:33 PM
right could you put me some pics off the ashly exhaust up please mate i really need one so im definately going to get it from you pm me asap please
chappers1.3
06-06-07, 03:06 PM
will the dizzy n coil set up fit on a 2.0ltr??
if they will i'll have off you.
Pics of exhaust:
Good condition, no holes, just a bit of surface rust and mud splashes etc.
http://img.photobucket.com/albums/v86/Nova-crew/P1010004Med32432ium.jpg
http://img.photobucket.com/albums/v86/Nova-crew/P1010005Med3242ium.jpg
http://img.photobucket.com/albums/v86/Nova-crew/P10132430006Medium.jpg
raymond
07-06-07, 04:38 PM
is the cam fast road or rally cam mate:thumb:
what engines will that exhaust fit?
is the cam fast road or rally cam mate:thumb: Half way,Lol.
Its the one you want anyway, none of this fast road bollox.
Its 295deg, and wouldn't run on my SPi lol Its getting towards "rally" profile.
Dave-Just sr(or 1.2/1.6 with a sr manifold)
BUMP need this stuff gone, somes going on ebay tonight.
raymond
07-06-07, 06:20 PM
Half way,Lol.
Its the one you want anyway, none of this fast road bollox.
Its 295deg, and wouldn't run on my SPi lol Its getting towards "rally" profile.
Dave-Just sr(or 1.2/1.6 with a sr manifold)
BUMP need this stuff gone, somes going on ebay tonight.
is it anything like the kent nv062 cam that was rally spec and that was perfect ran lumpy went like fcuk if its and it will fit my sri engine im intersted :thumb:
NVO62 is a mild road cam and about 270deg duration.
AST2 is a lot more aggressive.
I wouldn't put money on it running well in a standard injection engine.
raymond
07-06-07, 06:57 PM
in what sense do you mean running well on the standard injection system
Because of the cam duration etc, it messes with the standard MAP sensor because of it "pulsing", so the standard ecu wont cope with it very well.
tom reid
07-06-07, 09:16 PM
What does the head measure?, from the block face to the cam cover surface.
greg1.4
07-06-07, 09:17 PM
i have pm'd you. i am desperate for the ashley exhaust system. get back to me asap please mate. thanks,
Greg
What does the head measure?, from the block face to the cam cover surface.
No idea.
How accurate does the measurement need to be?
greg1.4
07-06-07, 10:32 PM
sorted..
Ad, you got any E16SE inlet manifolds knocking about
(Note: Im aware Nova Pilot has one for sale, but Ad is loads nearer :thumb:)
tom reid
08-06-07, 09:08 PM
No idea.
How accurate does the measurement need to be?
Head needs to be AT LEAST 3".732
Ad, you got any E16SE inlet manifolds knocking about
(Note: Im aware Nova Pilot has one for sale, but Ad is loads nearer :thumb:)
I dont mate no. :(
Tom-Will measure the head tomorrow, been busy as fcuk today.
Still got the ASt2 ?
Will take it off your hands ASAP
Still got it mate. :)
Exhaust system is provisionally sold for the asking price :)
Bump
Tom-The head is 98mm.
Wazza024
09-06-07, 11:14 PM
Have u got the 4-1 manifold for sale still?
tom reid
09-06-07, 11:49 PM
Bump
Tom-The head is 98mm.
Thanks, I'll have it, if it's not sold, in which case I won't have it, someone else willlol
Wazza-Yeah.
Tom-Its still for sale, i'll pm you.
Wazza024
10-06-07, 01:13 PM
[quote=Long Live The Nova]Wazza-Yeah.
Is it good condition? Is it for the sr or gte?
List updated
Wazza-4branch now sold mate.
Up.
Carbs just been collected :(
4branch gone
Ignition system gone.
Everything else available until i have a payment in my hand.
Head awaiting pickup by tom this weekend.
Exhaust system still available.
AST2 still available
Also, any bits off a 1400 bottom end :)
BTTT
Ast2 prov sold awaiting collection.
STILL got the Ashley exhaust system, and the Pressure Regulator.
Up.
Just exhaust and regulator left.
Cylinder head sold.
tom reid
20-06-07, 08:52 PM
Is the cam gone?
Still here Tom.
Will have to see if andy still wants it.
tom reid
20-06-07, 10:05 PM
As I said on Sunday, I'll have it!!
Let me know.
Good to meet you by the way.
You too mate. :)
I'll let you know about the cam.
If the cams not gone Ill have it! Only in Cheadle fella....
Its awaiting collection by Tom mate.
So can be classed as sold.
Ok mate, no worries. PM me if it goes tits up and i'll definately take it!
nuno_gt
11-07-07, 11:07 PM
How much is the std C16SE cam?
have you still got the exhaust mate?
Nuno gt-?20 mate, but im unsure how much extra delivery will be to portugal.
Novaboyz-Sold mate.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.