novax
17-05-07, 10:36 PM
Hi,
I've stripped my engine for sale.
http://byfiles.storage.msn.com/y1pylK-YKjoh4-RxERGzwnQprmHGHwSf6ALHUAj3eBiHVPi5rFMWpg3bIlo1GTdF _Up
This post is for the block only and Includes:
1 block, rebored (+0.5mm) to eliminate piston-slap that these engines suffer from.
4 NEW +0.5mm AE pistons/rings etc.
SBD cambelt pulleys
SBD oilpump solid steel gear
SBD oil pressure relief valve
Nova bottom pulley
ARP rod bolts
flywheel and clutch
All new seals, shells etc as you'd expect.
Chrome dipstick pipe
starter motorClutchplate, flywheel, crank, conrods and pistons have ben balanced by "Bassett Down Balancing" This is a fully balanced bottom end.
ONLY done 5000 miles or so
?500
I've stripped my engine for sale.
http://byfiles.storage.msn.com/y1pylK-YKjoh4-RxERGzwnQprmHGHwSf6ALHUAj3eBiHVPi5rFMWpg3bIlo1GTdF _Up
This post is for the block only and Includes:
1 block, rebored (+0.5mm) to eliminate piston-slap that these engines suffer from.
4 NEW +0.5mm AE pistons/rings etc.
SBD cambelt pulleys
SBD oilpump solid steel gear
SBD oil pressure relief valve
Nova bottom pulley
ARP rod bolts
flywheel and clutch
All new seals, shells etc as you'd expect.
Chrome dipstick pipe
starter motorClutchplate, flywheel, crank, conrods and pistons have ben balanced by "Bassett Down Balancing" This is a fully balanced bottom end.
ONLY done 5000 miles or so
?500