PDA

View Full Version : Digi Dash in a 1.2 Nova



richmister
03-05-07, 12:09 PM
Hey all, I have just fitted a Digi Dash in a Nova 1.2i Flair. It's all wired in and everything is lovely jubbly :P but one, fairly serious problem... :P

The speedo is WAY out. When I do about 30mph (on TomTom) the speedo says about 14/15mph. And it's the same right up to 60, that I have tried.

I have added a tranducer with the digi dash that I brought and I replaced the white/yellow cogs inside of it from a 1.6 i believe.

Any ideas why it doesn't work?

maccas
03-05-07, 04:26 PM
at 60mph does the speedo read 30mph? meaning its out by a factor of 2? if so there is a little red switch on top of the clock unit and it has 2 settings, try it on the other setting and see if the problem still exists, hope this helps

maccas

Adam
03-05-07, 05:45 PM
Aye, turn ign off and flick the switch.
If that dont work you have the wrong transducer for your dash.

richmister
03-05-07, 06:55 PM
Okay, i'll give it a try. Thanks alot guys. I'll let you know how I get on.

richmister
04-05-07, 01:59 PM
Thanks guys for that. I flicked it to the right and it's perfect now. Just the usual amount out, about 3-5 mph, but that's normal for every speedo. So i'm very happy. Thanks! :)