getting fuel

[rickyholder]

can some one just tell me in plain english a guide to get fuel when wiring my e16se into 1400sri just wanna know if its write and do it in simple terms please

[Adam]

The ecu to car plug must have RED-Live 12v
BLACK-Ign
RED/BLUE- To the fuel pump.

Thats alls you need for it to start.

As soon as you crank the ecu energises the fuel pump relay, turning the pump on.

[rickyholder]

ecu to car plug must have red 12v live??? explain please

[Adam]

Well, the e16se engine loom has a plug on it, where it plugs into the gte's car loom.
It has a few wires
Red,Black,Red/Blue,Green,Blue,Brown/White

If you join the Red to a permanent live(the batt), the black to an ignition live(ign coil,fusebox,ign switch) and the red/blue to the fuel pump.
The engine WILL start, assuming it has pistons etc,Lol. And everything is working(the coil etc)


Edit-Because you have a sri, you could wire those wires/\ to the ones that went to the sri ecu.

[rickyholder]

so the red and blue one i can just run a wire to the positive on fuel pump

[Iain]

Yes

[rickyholder]

i have the pump running of the old loom is this wrong or would it work

[Adam]

Thats wrong.

You need the gte engine loom(with its fuel relay) controlling the pump.
As the old look fuel relay wont go live with the sri ecu removed.

[rickyholder]

so i keep the gte fuel relay as it is and then join the red blue wire from the plug thing to the fule pump

[Adam]

The red/blue in the black plug on the gte engine loom, join that to the Red/Blue at the SRI fuel pump relay(as thats still wired to the pump). That would work.

[rickyholder]

is that with the old ecu disconnected then

[Adam]

Yeah.
As the Red/Blue wire from the SRI relay doesn't run to the ecu.
It runs to the pump.

[stevie78]

dont ask me why but u need too wire the green rev counter wire in for it too start. itried for ages too get mine too go and that done the trick;)

[Adam]

Seriously? /\ I dont see how,
but if so, i think Iain will be laughing tomorrow,Lol.

[Iain]

:wtf: