Falshing Lights

[Anonymous]

I got a micro scan remote central locking kit and i cannot find a way to flash my side lights when its locked or unlocked.
The kit has one wire to flash the lights where do i wire it up. If i wire it too the hazards when you indicate all the indicators flash and same if you wire it up to the stalks. I can only get one side to flash with the indicators still working
cheers

[Anonymous]

right add that wire to the positive feed for both sidelights

sorted

Micky@novaload.net

[Anonymous]

Then that means when i indicate all the indicators flash dosnt it

[Anonymous]

get a relay, and make it so the feeds arnt connnected when the alarm isn't flashing

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D

Driver required to take car to VBOA/TRAX apply at ste@novaload.net

[Anonymous]

I used to have microscan kit, I think its the pink wire as flash output, I soldered 2 diodes onto the end of the wire and then using 1 diode for left and the other for the right, worked fine,