A few GTE wires (green/brown, blue....)

[Iain]

Got these wires coming out my GTE loom and unsure where they go. Can anybody help?

There's two longer ones: a green/brown and solid blue (with the ends cut off)
And two shorter ones with connectors: a green/brown and solid brown

Thanks :D

http://www.iainel.co.uk/images/forums/GTEWires.jpg

[draper]

LLTN will know lol

[Stanley]

I reckon the two smaller wires towards the right of the pic will be temp sender/thermostat switch wires.

As for the other two - LLTN, take it away

[Iain]

I don't think he's entirely sure, and he's helped me enough the past few days so he deserves a break lol

[Iain]

temp sender/thermostat switch wires

They both have spade connectors on; where abouts would they go to then?

[Adam]

LLTN will know lol Ive been helping him with this for about the last week! lollollol

Unfourtunately there wires that i dont recognise, solid blue i would say dash temp sender, but im not sure if thats on the car loom?

[draper]

the brown will be an earth surely ?? or do you mean the brown and the green brown are in the same plug ??

[Stanley]

The spade connectors 'should' go onto temp senders on th head somewhere.

As to where, i aint got a clue.

Start it up and see whats not working/working incorrectly

[Adam]

Yeah.

But its poking out by the top of the gearbox and is a short wire so i cant see where that could go.

I thought the ignition coil at first, but iain says the coils already wired.

[Stanley]

Horn?

[Iain]

No horn's on the car loom, these wires are on the GTE engine loom.

Yes Draper I'd have thought brown would be earth but it has a spade connector as if it's supposed to attach to something.

I'll see how much I can wiggle the loom as to where the wires will reach. :)

[draper]

the spade connector could be irrelvent tbh, could just be because the previous owner cut it accidently etc

does the car start and run ??

[Iain]

Not tried yet. I'm going to attempt to start it this weekend hopefully.

[gazz]

just a thought but they not go on brake resevour top..
dont have go at me if wrong though please.....:thumb:

no they dont! dont worry.....

[Mike]

me and baxter fell for this one! the blue is water temp, the lug it plugs onto is hiding down the back of the inlet manifold :thumb:

[burgo]

me and baxter fell for this one! the blue is water temp, the lug it plugs onto is hiding down the back of the inlet manifold :thumb:you mean the red bit ;)
http://i12.photobucket.com/albums/a226/sclurgess/DSCN01462.jpg?t=1177625426

check to see if you have anything plugged into the sensor circled in green praps this accounts for the cut ones?

[Mike]

thats the one burgo :thumb:

[craig green]

The green/brown is a diagnostics isnt it? Just tape it up, out of the way.