digi dash problems....yes another one lol

[ReeceH]

well decided to wire the digi dash up yesterday using the wiring diagram.

its all working fine apart from the indicators...

it says black and white to black and white
and black and green to black and green

but i dont have these wires on the nova loom?

only one i have spare is a black green and white which i dont know where that gans??

also it aint lighting up... when i was stripping the wires 2 of them touched and sparked,and my left front and rear sidelights have gone now too. just a fuse? or possibly bulbs in the dash?

[Adam]

You need splice into them at the indicator stalk, dont use the wire that goes to the std nova clocks as thats black/white/green dot.

You need black/white
and black/green.

[ReeceH]

ahhh makes sense now mucker.

think the reason it aint lighting up is coz of them wires touching and blowing a fuse aye?

[Adam]

Could be a fuse yeah.

You should have done ALL the wiring with the battery disconnected.
Not sure how they would have sparked, as the dash is ign 12v, so it wouldn't spark unless you had the ignition on at the time.

[ReeceH]

yeh turned the ignition on and it sparked and got a tad of smoke lol

all the dash works like just the the display aint lighting up