X16XE Wiring

[hendrix]

Going to be doing and X16XE conversion into my nova shortly.
How easy is it to wire up?? I have the loom for the engine and also the chip and the thing that goes around the ign barrel. How does this wire into the loom as there are 4 or 6 wires coming off it and i have no idea where they go.
Cheers

[Adam]

Right.

The x16 loom has a small 9pin plug where it gets its power etc from the car loom.
It should have-
Green-To tacho on dash
Blue-Coolant guage on dash
Thick Red/Blue-To fuel pump
Black-Ign switched 12v
Red-Permanent 12v
Brown/blue-ECU light
Brown/white,brown/yellow-Ecu diagnostics
Thin red/blue-From immobiliser pickup

The immobiliser pickup ring plug should have these wires:-
Off the top of my head it has-
Blue/red from gearbox speed sender
Blue/Red TO the ecu(this is the immobiliser signal)
Red-12v perm
Black-Ign 12v
Brown-Earth

And a few others i cant remember, altho im pretty sure there not needed.