Is now getting on my nerves

[Anonymous]

X-( X-(
My 1.2 is making me angry cause i've developed a knocking noise.It has been droped -60mm on Auto XS springs&uprated gas dampers(this was done 2 years ago)now in last 4months has developed a knocking noise on front paessenger side? But have changed the shocks again&it's still there!(both)Changed the track rod ends&it's side there!changed the ball joints&it still there!CV joints don't tick or anything on full lock and had looked at&told thats not it!Does anyone know what it could be??
Plz help
:-/

[Anonymous]

wheel bearings??!!

"I'm a junky with a monkey"

[Anonymous]

will try replacing them!

if works will buy monkey a drink!

;)

[Anonymous]

tie bar bushes, lower arm bushes, top mounts

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D

[Anonymous]

Top mounts sounds very likely to me.

[Anonymous]

Jack the front wheels up off the ground and give the whole hub assembly a good wobble.

You'll easily be able to play "spot the wa nkered bearing".

:)

Ben.

[Anonymous]

I had similar and found that the bolts holding the hub assembly to the shocker had loosened a bit.

[Anonymous]

:O at cp

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D

[Anonymous]

did u use new ones cp cause u are supposed to use new ones everytime u take them out!!

16v Nova - Toolkit, Trouble, Points and great expence all come as standard :)

2.0 16v back soon :D

[Anonymous]

Nope :D Never had probs b4 -maybe didn't torque them up properly - get a bit forgetful in me old age!:O OK ever since tho'......




wot were you saying??? Lol!

[Anonymous]

I always use new bolts, when changing them borrow a mate and his ramp@work to do the work!
Will have a good look@the top mounts!
:)

[Anonymous]

It seem to happen only when cars weight is on it!these top mounts, you guys are on about are they the upper strut mounts?
:D
Are they cheap to replace? wot am I looking to be wrong with them?
:-/