Digi dash transducer.

[JSeymour]

where do the 3 wires go? it has 3 on the end.

do they go onto the spare wires fron the black and white plugs? i have 2 unused wires.

or am i missing a bit?

[Spudly]

Two of them are power and earth these should go to the power and earth for the dash itself, black is the live and brown is the earth iirc, the blue one with the red trace is your signal to the dash, just connect that to the same wire on the dash plugs and you should be sorted, have you not got a guide to use for the wiring??

If youve not got one then got to www.nova-land.com (http://www.nova-land.com) click on the bit saying interior then scroll down to how to guides, and there are two on there, one for a mk1 dash and for mk2 dashes, hope that helps ya mate!

[Adam]

Wire the black, brown to any ignition live, earth. Dont need go to the dash.
Then the blue/red to the dash.

The dash should have no spare black/brown wires, altho iirc one black on mine was for a tow telltale light.

[JSeymour]

Thanks for that lads.