View Full Version : Hi-spec nova breaking soon
Due to some changing circumstances over the summer I am having to break my car up.
Parts will be available after easter weekend for collection preferably from Selby, North Yorkshire...
Full stainless exhaust, made by JP. Twin box system with 2" tailpipe, inc modified manifold to suit - ?200
Twin Dellorto DHLA 45mm Carbs with everything to run on an XE. SBD Inlet, linkages, Facet solid state pump, Filter King Regulator, Cavalier ignition setup, 30mm polished trumpets - ?600
F20cr gearbox with Tranx plate LSD, plates were new last year, only used for 3 months (not everyday either lol) - ?500
Rose jointed front Tie-bars with lowered front mounts - prov sold - shell
Strengthened TCA's with PolyRace bushes - prov sold - shell
GRP Bonnet and Boot - Bonnet can come with a Trooper vent (not fitted) and boot comes with PolyCarb rear window. Both come with pins to fit. - ?150
GSi big mouth front bumper - prov sold - shell
Cavalier Cesaro wheels, come with Yokohama A005 190/580-15 full slick tyres - ?250
GSi Dash, comes with two switches cut in above fusebox - prov sold - shell
GSi rear bumper, finished in black metallic - prov sold- shell
Louved bonnet, requires rub down and paint - -prov sold -shell
Pair of door, good condition - prov sold - shell
Rear beam, new wheel bearings and slave cylinders, c/w PolyRace bushes (not fitted) - prov sold - shell
TerraTrip intercom, brand new, in box with headsets for full face helmets - prov sold - dan
Microdynamics rev limiter, coil mount - ?60
Shell, 1991 3-door, should be well known - prov sold - shell
Registration number, will be on retention - J2OXE - prov sold - shell
Chris
nova ian
30-03-07, 02:39 PM
You have a pm, I realise you wont be able to get the pics straight away, but when ever you can.
Thanks
Ian
Pics will be taken this weekend of everything and posted up next week.
Thanks for the interest...
Chris
b0ll0cks! good **** always comes up when i have no money!! arghhhh!
whats the shell like mate?
put me down for wheels please bud..:thumb:
compomotives..
ReeceH, stuff wont be for sale until June anyway, so get saving
*Mike*, shell is 1991, 3 door painted in Apache Bronze metallic. Very tidy, however it has no rear seat brackets and some other bits have been removed for weight saving. It has 1 former keeper. V5 Present blah blah
http://img.photobucket.com/albums/v699/Chris16v/IMG_3207.jpg
http://img.photobucket.com/albums/v699/Chris16v/DSCF0002.jpg
http://img.photobucket.com/albums/v699/Chris16v/P1010596.jpg
Chris
Edited, quickrack included...
Cavalier Cesaro wheels, come with Yokohama A005 190/580-15 full slick tyres - ?250
Louved bonnet, requires rub down and paint - ?50
TerraTrip intercom, brand new, in box with headsets for full face helmets - ?65
QED fast road/track cams - ?125
Adjustable verniers - ?65
The above parts are currently not fitted and can be sold delivered straight away.
Chris
pic of the verniers
http://img.photobucket.com/albums/v699/Chris16v/P1010096.jpg
mate any chance in delivery of the shell and ill have it this weekend?
mate any chance in delivery of the shell and ill have it this weekend?
No, read the main post on the thread. The car will be broken early June. I have a Nurburgring trip booked over May bank holiday which I am using the car for...
Chris
never mind then should post it then as could smash it or sumthin
never mind then should post it then as could smash it or sumthin
yeah thanks for that.... :roll: :roll:
pm'd mate. al have the f20 box and possibly more items,al have to see hwat money i have at the time
just tried to reply to you PM, but your inbox is full....
Alright mate,
Not interested in a swap matey, getting out of the car scene completely....
There are 4 cesaro's with slicks fitted to them.
You wanting the box with or without the diff? As I have a couple knocking around with standard diff's fitted..
Chris
are the coilovers front and back
Jedi,
Yes the coilovers are front and rear.
All PM's will be replied to on sunday (with pics) as I only have access to the net on my mobile until then.
Chris
ANDYRACER
30-03-07, 10:09 PM
Ill have the Cage Chris when u break it :thumb:
would you split the coilovers?
matthew172
30-03-07, 10:22 PM
would you split the coilovers?
what you just want the spring without the dampooer
I have stolen internet lol lol
All PM's replied to..
Jedi, sorry, I am not willing to split the coilovers however I would do them for ?400 with the top mounts.
Chris
kevster
31-03-07, 07:39 PM
pm chris
pm's will be replied to tommorow evening.
Kevster, np, you are about 6th on the list lol
Chris
kevster
31-03-07, 07:50 PM
lol looks like gods not on my side lol no worrys dude :)
can i come up some time in the next few weeks and hear the engine/have you take me out for a run etc ??
if i have the engine ill also take the zorst ;)
Chris..
put me down for the avos..
gimme 2-3weeks?
mate:D
GRP Bonnet and Boot - Bonnet can come with a Trooper vent (not fitted) and boot comes with PolyCarb rear window. Both come with pins to fit.
EDIT: Quickrack (Quaife unit) - ?65
EDIT: Adjustable verniers - ?65
Hi mate!
How much for the bonnet minus vent?
Is the quick rack new or used? (Ready to fit - or kit form?)
And finally, are the verniers the round or sqaure tooth type (looks like round tooth, but just checking...)
Thanks mate, Rob.
absaloutlyvauxmad
01-04-07, 12:09 PM
chris, any answer on my offer i pm'ed you???
kevster
01-04-07, 01:52 PM
AVO coilovers, great condition, new late 2005, front just been re-built by AVO - ?350
Eccentric Top mounts - ?75
Wilwood Dynalite 4-pot calipers with Poly 'Q' pads and 280mm drilled discs, will have a few spare sets of pads - ?375
as spoke about on the phone thanks dude kev:)
kevster
01-04-07, 01:55 PM
Twin Dellorto DHLA 45mm Carbs with everything to run on an XE. SBD Inlet, linkages, Facet solid state pump, Filter King Regulator, Cavalier ignition setup, 30mm polished trumpets - ?600
Microdynamics rev limiter, coil mount - ?60
add this tho the list to bud just hope i get payed on time lol thanks bud
can u post a pic of the cesaros please
Chris sent pm to see if i can have first refusal on peddle box!
pm's replied to.
Main post is now edited to say the car will be getting broken next weekend. All parts will be available from then.
Chris
novashed
01-04-07, 08:37 PM
got any specs on the cams, also what type teeth are the verniers?
paul
prov sold mate, as per main thread. Sorry
Chris
kevster
02-04-07, 07:15 PM
i hope the mos are still mine chris
?30 for the cluster posted matey, it is mint.
Chris
i hope the mos are still mine chris :thumb: :thumb: :thumb:
coochiSR
02-04-07, 08:29 PM
Pics of cesaro's please!
graham kirkbride
02-04-07, 09:08 PM
i`ll have your seats and shafts chris, see you at the weekend;)
Chris,
Did you get my second PM re GRP bonnet and hatch?
You have then down as prov sold....hope that is to me still!!!
Can you send me some further details regarding bonnet condition as mentioned in your PM.
What about the rear quater poly carbs?
Cheers,
Dave.
Your pm is full- please pm me
absaloutlyvauxmad
03-04-07, 07:45 PM
pm replied
Just edited the first post again....
Note,
Exhaust is available again.
Carbs are available
Rev limiter is available
Gearbox and LSD is available.
Chris
coochiSR
04-04-07, 07:40 PM
Pics or cesaro's???
sorry mate, I forgot, will do it now.
PM me your email addy...
Chris
coochiSR
04-04-07, 07:41 PM
coochi_boy03@hotmail.co.uk, y PM you it, everyone else has got it lol
Chris, Thanks for the cluster, nice to meet you fella, Nick.
Chris cba to read through the pages of posts, if you got any decent XE tuning bits left or get let down let me know mate after nigh on everything.
trackdaynova
04-04-07, 11:27 PM
still after quikrack if available :)
quick rack gone, sorry...
Ben, look at the main thread on first page. It is up-to-date
Chris
kevster
07-04-07, 07:26 PM
i spoted flat eric in the nova lol love it lol
sellin the bucket seats and mounts?
sorry mate, seats and mounts have gone. First post is now up-to-date
Chris
Louved bonnet, requires rub down and paint - Still going with the shell chris?
if not any pics?
kevster
09-04-07, 02:04 PM
nice to meet you fella thanks for you help in meeting me 1/2 way :)
rallygareth
09-04-07, 09:30 PM
Do you still have the bonnet & hatch
Chris,
Pm'd re bonnet and hatch again.
Cheers, Dave.
Any 20XE or nova parts in chrome?
got a polished rocker cover matey, ?70.
http://img.photobucket.com/albums/v699/Chris16v/Image116.jpg
Very nice, but I need a mirror finish to go with all my engine bling which is all chrome.
Looks famlier ^^ lol
any gen on the bonnet chris?
Chris ,
i've pm'd my contact details.
i'm a complete duffer as I was replying to my own pms and getting them back in my inbox thinking they were a copy:tard:
Would you be able to meet part way? or if you are down towards the midlands at any point?
Cheers,
Dave.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.