PDA

View Full Version : help! gsi wiring diagram



stevie78
23-03-07, 10:39 PM
any one got one?

draper
23-03-07, 10:46 PM
haynes manual ?? wiring diagram for what exactly ??

stevie78
23-03-07, 10:54 PM
just wired in e16 gsi into 14 sri been told it is wired right will not fire gettin spark any ideas
:confused:

bump
23-03-07, 11:18 PM
Without any more info it sounds like the starter solenoid isn't on a cranking live to me.

Try a multimeter on it when at all three ignition key positions.

stevie78
23-03-07, 11:33 PM
it did start once would not idel or rev up do u think the ecu could be gone:roll:

bump
23-03-07, 11:42 PM
Is it flashing a fault status? Is the status lamp wired?

stevie78
23-03-07, 11:54 PM
if u mean the engine managment light its not wired the guys that are wiring it says its not needed

bump
24-03-07, 12:20 AM
Well without it you won't be able to see f the ECU is registering a fault or be able to read the fault codes off without a dedicated fault code reader.

stevie78
24-03-07, 12:49 AM
ive never wired a car before what i do know is the engine managment rev counter and the temp gauge is not wired in they say is dosent need 2 be 2 get it started what u think

bump
24-03-07, 01:32 AM
You don't need them connected to start it but it can prove handy for fault diagnosing.

I'd still say to test the feeds to the solenoid first.

Cheeze
24-03-07, 10:31 AM
Steve this might help you mate http://www.novaload.net/forum/showthread.php?t=74921&highlight=engine+wires did u get the fuel pump relay also?

stevie78
24-03-07, 12:50 PM
problem solved wired the green from the plug too the coil and taco away she weny:D :thumb:

stevie78
28-03-07, 06:26 PM
no startin again gettin good spark but will not fire:cry: