Fitting C/Locking

[Welsh Dan]

Where does this lot all plug in please?

I've already got electric windows, but iainel tells me that some of this loom is the window loom, and that the control box sits in the passenger footwell:
http://www.xen0phobiak.f2s.com/novaload/clocking.jpg

I'm assuming that the larger of the 2 servo's is for the passenger side, and the smaller, sensor one is for the drivers side. Can anyone tell me which wires I need to connect to where, and possibly post up pics of how the servo's mount?

Thanks.

[Iain]

It's riveted to the door as you can see here from these pics I have just kindly taken for you

http://www.iainel.co.uk/images/forums/cl1.jpg

http://www.iainel.co.uk/images/forums/cl2.jpg

[draper]

dont believe iainel :p

id of said the 'bigger' motor is the drivers side as the passenger side is normally a 'slave' motor, are they GM ones as im sure mine are the same size ??

[Welsh Dan]

Can anyone help me with which wires I need to connect to which parts of the car then please?

[Mike]

the bigger motor IS the drivers door, i think you may have some of the elec window loom in there

the red one (iirc) should have a little spade plug on the end where it plugs into the fuse box (iirc) the two browns shuold also go into the fuse box next to the red wire

altho, that red could be to do with a aftermarket C/L system

[Mike]

That smaller motor is DEFO not GM ;)

[Welsh Dan]

That smaller motor is DEFO not GM ;)

Right you are:
http://www.xen0phobiak.f2s.com/novaload/motors.jpg
(I hadn't actually checked lol).

So, the lone red is live for the system, and the browns are ground? Can I just ingore the other wires?

[draper]

ive got a central locking and elec window loom here somewhere - after my tea ill have a look at it and see if i can figure something out buddy

[Welsh Dan]

Cheers :thumb:.

[Mike]

ive got a central locking and elec window loom here somewhere - after my tea ill have a look at it and see if i can figure something out buddy

just the job that!

P.s Draper, those mags were posted on Wednesday matey, sorry for the delay in that, but should be with you v-soon mate :thumb:

[mikey14sr]

The non-gm motor wants to go in the drivers door. It looks as though it is just wired to replace the original. Which is fine if you dont want remote central locking, as it is wired to be nothing more than a switch. If you do, the other two wires on it (red + blue) will need connecting to the relay, to the wires that go to the other motor.

[Welsh Dan]

I'm hoping to fit this today, so from what's been said here I think:

smaller non-GM motor goes in the drivers door, larger one in the passenger door.
The lone red wire plugs into the fuse box somewhere, and the 2 browns are earth.

Is that correct?