PDA

View Full Version : 15" OZ alloys


parrycakes
13-03-07, 02:43 PM
would 15" OZ alloys fit my nova?its an 89 mk1 shape.
Pillar
13-03-07, 03:41 PM
if its et49 or 45 yeah
nova-boy-belfast
13-03-07, 07:11 PM
my polaris 16" wheels fit my mk2
parrycakes
13-03-07, 08:40 PM
so thats a yeah?
NovaKen
13-03-07, 09:36 PM
depends on the offset (et), I've got a set of OZ Sarturn alloys, but they don't fit as they are et 31:(

The et is normally found on the rear of the rim around the outside if you don't know what the offset is on your wheels. Only et 45 to 47 fit. I wish i knew that before i refurbed wheels that don't fit.:cry:
parrycakes
13-03-07, 09:54 PM
ok ill ask the guy whos selling them.hopefully theyll fit!
NovaKen
13-03-07, 10:06 PM
hope you have better luck than me :)
ken
Jack
13-03-07, 10:48 PM
....and assuming the wheels have a PCD of 4x100! Can't remember what the centre bore should be, I have a feeling its either 56mm or 65mm, something like that...
Ash
14-03-07, 04:58 PM
my 15" OZ alloys are ET38, they dont rub....




..but i've have alot of arch arch done.