Conversion Nova let

[josevigsi]

Hello people!

I?m Jose Cordoba, I?m from Barcelona, Spain, i have a nova 2.0 with 20seh.

Now i have to buy a calibra turbo 4x4, and i want to get this motor and push it on the nova...

I need help, information of how can i made this conversion?

What parts i need to made this modification?

Very thanks! This page is great! I love your nova turbos!!!

You are the best!:)

[craig green]

Engine mountings
Driveshafts
A good/strong F20 gearbox or a F28 (6spd)
LET engine & all ancillaries
Intercooler & pipework
Chassis plating kit.

The rest of the car will need to be uprated to suit the massive hike in power.
Most of the work involved is problem solving & fabrication to make all the parts fit in place.

Brakes, suspension, body shell structure etc

[josevigsi]

hi craig green,

i have the calibra turbo full. with all peaces.

In mtech website can i find the kit conversion whit all the peaces?where?

Suspension i have buy kayaba agx, brackes of calibra turbo.

Thanks!

[cornish]

Have a look on www.chrisastleymotorsport.co.uk (http://www.chrisastleymotorsport.co.uk) - he sells pretty much everything you will need :cool:

[Paul]

as you already have the 20se/h in there you have the mounts needed for the LET.

If you use the f16 gearbox thats originally with the 20se/h it will die. the f20 will be ok for a little while also. best bet is f28, plus you get the extra gear.

For the f28 you need to find the another (for you passenger, for us drivers) mount. drill the spot welds out and weld this onto where the original gearbox mount was.

You then to modify the linkage to make the 6 speed f28 work. its needs cutting down by 35mm and turning a bit. its trial and error there mate.

As for the calibra turbo brakes, they will need to be drilled down to suit the 4stud pattern.

For intercooler, its down to personal preference, but get a large frount mounted intercooler from a frontera/evo/cosworth and then just get the pipes made to suit.

The wiring is basically the same as the 2.0.

I would stitch weld your car at the least plate is advisable but not a necessity.

Paul

[The Simps]

You may find this helpful mate.

I went from XE to LET last year and kept a diary. Still adding to it!

http://www.migweb.co.uk/forums/showthread.php?t=270670

[James P]

you wont get a engine in a nova by pushing it in! lol only joking,

make sure you do a w.i.p thread ok.
good luck and may the force be with you.

[josevigsi]

You may find this helpful mate.

I went from XE to LET last year and kept a diary. Still adding to it!

http://www.migweb.co.uk/forums/showthread.php?t=270670

teh simps you are my god!