PDA

View Full Version : yet another quit inlet question


LUV2XLR8
13-03-07, 10:10 AM
is the 1200 carb inlet the same as the 1300? :wall:
craig green
13-03-07, 10:24 AM
NO iirc
macc nova
13-03-07, 11:12 AM
yes, they both have cathedral ports. However you can get different versions (single and twin choke inlets). Eg twin choke has to be used for weber 32/34 carbs. :thumb:
Welsh Dan
13-03-07, 01:34 PM
The 1200 has a single port for the carb, whereas the 1300 one has a double port for the twinchoke carb.
LUV2XLR8
13-03-07, 02:52 PM
i see, so i will need the 1300 then, thanks ;)
Adam
13-03-07, 03:38 PM
Yep its different as already explained
garyc
13-03-07, 06:46 PM
I thought some of the real early 1300's had a single choke carb too, but I have never seen one. I picked up a beford astramax van one the other week which was a single choke one like the 1200 manifold with longer runners.

the 1200 and van ones look like this

http://homepage.ntlworld.com/garyc/Picture%20154.jpg
Welsh Dan
13-03-07, 06:50 PM
My 1200 one doesnt look like that iirc. I'll post a pic up later.

EDIT:
http://www.xen0phobiak.f2s.com/novaload/1200inlet.jpg
LUV2XLR8
13-03-07, 07:34 PM
tidy, i had a look at a 1200 today, same as that inlet above. need a square tooth crank pully too
Adam
13-03-07, 07:46 PM
The very early 1300s had the 1200's inlet and carb.
garyc
13-03-07, 09:35 PM
perhaps I should have said simmilar to rather than like.