View Full Version : C14SE loom and ECU from Corsa SRi
Stanley
08-03-07, 07:02 PM
As above, in good condition. (engine not included)
Removed due to no longer needing it.
?30 delivered??
Cheers, Stan:thumb:
Is it complete?
Has the plug where it plugs into the car loom by the ecu etc?
Fuel pump relay?
Stanley
08-03-07, 07:33 PM
Its the full loom still plugged into ECU so its complete i thats what you mean.
Corsa is sittin on drive so i could see if the pump relay is there..
What does it look like??
Its next to the ecu, usually purple.
Is it a DISpak loom/ecu? Or dizzy?
Stanley
08-03-07, 07:42 PM
Dispak yeh.
Il dig it out sometimend get some pics...
Damn, i needed Dizzy loom/ecu as i only have a dizzy cam carrier :(
Long live the x16sxr astra f and the x14sz corsa both have blanking plates in the end of the cam carrier to which the dis will bolt to.
Free bump!
I have the blanking plate in my loft, but it bolts into the cam carrier iirc.
My cam carrier doesn't have the bolt holes.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.