kevsters nova wip

[kevster]

well i have bin back on here now for about 3 weeks now after not haveing a computer for a long time thought i better post up some pics of my nova .
i have had it for 3 years now started life as i 1.2 merit lol
then 1600 8v out of a nova gsi with all the trimings, but i wanted more power so the time came for the xe :thumb:

so i started in the winter what a nob head i am lol

b 4
http://i165.photobucket.com/albums/u64/kevster240/14052006045.jpg
http://i165.photobucket.com/albums/u64/kevster240/30052006111.jpg

http://i165.photobucket.com/albums/u64/kevster240/29052006098.jpg

[kevster]

and now what it looks like :(:mad: :( :thumb:
oh yeah this i love takeing it out in the snow lol
http://i165.photobucket.com/albums/u64/kevster240/25012007222.jpg
http://i165.photobucket.com/albums/u64/kevster240/25012007223.jpg head off lol

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/25012007225.jpg
http://i165.photobucket.com/albums/u64/kevster240/25012007227.jpg
http://i165.photobucket.com/albums/u64/kevster240/25012007228.jpg
http://i165.photobucket.com/albums/u64/kevster240/25012007229.jpg
ready for spraying lol nearly lol
http://i165.photobucket.com/albums/u64/kevster240/25012007230.jpg

[kevster]

need some soild mounts were can i get them from ??

[Riggy]

pro tec will be best if your buying new kev , or check forums for 2nd handers :thumb:

progress looks good mate , just get on with it lol

[ashtal]

I was goint to treat myself to these but choose not to in the end due to have no money at the time !
http://cgi.ebay.co.uk/NOVA-ENGINE-GEARBOX-MOUNTS-HEAVY-DUTY_W0QQitemZ130078921681QQihZ003QQcategoryZ10404 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem?hash=item130 078921681

[kevster]

they look the nuts will have to get them me thinks

do they make much diffrence ????

[kevster]

well its been a week or two not really did much so lastnight went round to the garage to strip the xe down to see if the year that its bin standing had done any damage . well just to see if it turnd over !!lol
good as gold it was :thumb: . inlet manfold off found that it had blue injecterss do they make anydiffrancs ??? then cream ?? and that the weg in the body was already removed (saves me work):thumb: same as before what dose this achive??
then was checking the cams thought i would just wip them out to give them the once over and ended up getting some catcams 267 today ?400 dint think they were that dear :( oh yeah found that the head was new to:thumb:
anyway here some pic plus pic of some of the things that came in the post
big thanks from every one that helped on here too :thumb:
http://i165.photobucket.com/albums/u64/kevster240/Picture003.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture007.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture006.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture005.jpg

[kevster]

cleaned the box to i would like a spere one to so any one with a f20 let us know thanks:)
more pics of body ,blues and post bits :)
http://i165.photobucket.com/albums/u64/kevster240/Picture010.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture011.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture009.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture008.jpg

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/Picture001.jpg

[Driver]

is your cylinder head gold plated or just sprayed gold

or is it my eyes

[kevster]

lol its my new digy cam trying to sort it out now lol

[kevster]

pic updateing today lads

[kevster]

well not really done much to the nova audi failed its mot :eek: but thought i would update the pic of what i have got waiting for the nova :thumb:
will be a mad rush for pv now !!!!!! shell is going a really light blue cup172 blue:thumb:
my new wheels
http://i165.photobucket.com/albums/u64/kevster240/Picture058.jpg
sbd 70d t/s
http://i165.photobucket.com/albums/u64/kevster240/Picture057.jpg
bush kit
http://i165.photobucket.com/albums/u64/kevster240/Picture055.jpg

[kevster]

new 4-2-1
http://i165.photobucket.com/albums/u64/kevster240/Picture054.jpg
my wilwoods
http://i165.photobucket.com/albums/u64/kevster240/Picture053.jpg
avos with topmounts
http://i165.photobucket.com/albums/u64/kevster240/Picture052.jpg

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/Picture050.jpg and my baillys tanks

[kevster]

i love these wheel shame is not a 1http://i165.photobucket.com/albums/u64/kevster240/Picture.jpg6v one tho :(

[Adam]

Looks like you've been spending out on some tasty parts, very nice :cool:

[kevster]

yeah tell me about it lol bloody novas :) lol
i must say i do love them tho

[kevster]

Looks like you've been spending out on some tasty parts, very nice :cool:
must say tho yours looks nice !!!

[Dar]

Nice pile of bits to go on. I do love getting stuff in the post:D
Can't wait to see the car once its finished:thumb:

[kevster]

Nice pile of bits to go on. I do love getting stuff in the post:D
Can't wait to see the car once its finished:thumb:
yeah i will like to tag along with you guys next track day :thumb:
give me some idea what i in for lol

[raymond]

will look nice once its finished matey

thinking of taking the sideskirts of mine after seein that without any:)

[kevster]

do it mate so much better with out i think

[olix99]

looks good :thumb:, did you have to cut the chassis leg for the XE alternator ? or is that just a turbo thing?

[Adam]

Yeah, needs doing for xe too.

[kevster]

yeah made a plate to go in there :):) not just hitting it :(

[Dave.]

very tasty, like the bits alot

[kevster]

its bin a bit of time so here are some pics
of what i have been up to
striped ready cams to be fitted
http://i165.photobucket.com/albums/u64/kevster240/Picture012.jpg
cams out
http://i165.photobucket.com/albums/u64/kevster240/Picture008-2.jpg
then head off spin round for pump gaskit , sump gaskit
http://i165.photobucket.com/albums/u64/kevster240/Picture014-2.jpg
headback on
http://i165.photobucket.com/albums/u64/kevster240/Picture007-3.jpg
cams fitted thanks for you help austin
http://i165.photobucket.com/albums/u64/kevster240/Picture015-1.jpg
cleaned spraed box
http://i165.photobucket.com/albums/u64/kevster240/Picture017-2.jpg

[kevster]

thecams i have fitted are 280 katcams
http://i165.photobucket.com/albums/u64/kevster240/Picture016-1.jpg

[kevster]

plus a gave the block a clean and a spot of paint
http://i165.photobucket.com/albums/u64/kevster240/Picture020-1.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture021-1.jpg

[kevster]

and then put her back together
http://i165.photobucket.com/albums/u64/kevster240/Picture023-1.jpg
http://i165.photobucket.com/albums/u64/kevster240/Picture025-1.jpg

[carls nova sri]

looking good mate

[kevster]

looking good mate
thanks mate , i have had to hold on for a bit coz of the jyj (white nova)
needing tax and the audi had its mot lol

[carls nova sri]

so all the work will start now then haha

[BRoadGhost]

Are the black cam belt roller / tensioner plastic ones?

[big gra]

looking good so far!! love the red block!!

[kevster]

well small update its moved lol
http://i165.photobucket.com/albums/u64/kevster240/IMG_0045-1.jpg
http://i165.photobucket.com/albums/u64/kevster240/IMG_0046-1.jpg
gave it a clean the took the dash out and started to remove the sound deadin .
http://i165.photobucket.com/albums/u64/kevster240/IMG_0050.jpg
http://i165.photobucket.com/albums/u64/kevster240/IMG_0053.jpg
thanks kev

[Gibbo]

you done alot in two years then mate lol

[auzzy-b]

Are you going to run an early flat type fly wheel? much lighter than the pot type;) looking good..

[kevster]

well i had a 2.0L16v nova sri which was stolen . Then i got a vxr burg for a year , now im back on the blue nova lol .

more pics

http://i165.photobucket.com/albums/u64/kevster240/IMG_0070.jpg

http://i165.photobucket.com/albums/u64/kevster240/IMG_0073.jpg

http://i165.photobucket.com/albums/u64/kevster240/IMG_0068.jpg

http://i165.photobucket.com/albums/u64/kevster240/IMG_0071.jpg

http://i165.photobucket.com/albums/u64/kevster240/IMG_0074.jpg

http://i165.photobucket.com/albums/u64/kevster240/IMG_0049.jpg

[kevster]

Are you going to run an early flat type fly wheel? much lighter than the pot type;) looking good..
yeah i have got a early fly wheel going to send it to be lighten and balanced :thumb:

[kevster]

just got a 6 point safety d cage were i dont have to cut the dash :)

dash and door cards going to be flocked next week .

[kevster]

well its been along time since i have done anythink to the nova .ive been spending money else were like when i got rid or the vxr (burg) i got my self a ford focus st3 , and the mrs a zafira gsi. im hopeing to start doing it once more in the next week or two , depending on the state of the shell :)

[7ova]

crack on mate, get some photo's up of your work.
what colour is your ST?
sold my ST a few months ago
08 frozen white.

[kevster]

right dug the bits out the garage for the nova .
bear in mind its been over a year or so lol i have lost a brake pad that go's with my wilwoods , were would be the best place to get a new set ?
thanks kevin

[kevster]

crack on mate, get some photo's up of your work.
what colour is your ST?
sold my ST a few months ago
08 frozen white.
06 st colour is sea gray :thumb:

[scott.parker]

Pull your frigging finger out! lol almost as bad as Dan's turbo!

[kevster]

lol well pop up to drop some bits off to paul today ;' think its about bloody time i done some think !!!!

also got me in the mood to do somethink with it lol

[kevster]

small update pick'ed up a new gsi dash , waiting on a glove box form colin ,

got a new cam belt kit comeing this week , but were's the best place for a clutch or sorry should i say a good one not LUK as i do not like them lol last xe nova killed one in a month .
all so need inlet gaskit can you still get them from vaux?

[AndyGTE95]

thats a clean nova :thumb: nice
can you remember where you got your poly bushes from, i know is been a few years lol

[kevster]

thats a clean nova :thumb: nice
can you remember where you got your poly bushes from, i know is been a few years lol

yeah i got them for a parts shop down this way , but saying that they do pop up now and then on ebay mate .

[kevster]

Up date soon

[kevster]

well moved in to a new workshop this week . the poor nova as taken a beating from standing out side since 2006 :( .
needs a new o/s/ sill and a o/s/r spring seat . plus both the doors need some work will post up pics as soon as i get them off my phone .

sold the xe and im looking to have a turbo xe from a mate .

[kevster]

photos just uploading , when i went to pick her up i thought some one had sprayed her green lol.

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20120402_170023.jpg
on its way to the work shop.
http://i165.photobucket.com/albums/u64/kevster240/20120402_170033.jpg

[kevster]

got it to the work shop gave it a clean .
http://i165.photobucket.com/albums/u64/kevster240/20120402_181831.jpg

[kevster]

stuck it on the two poster to see how bad the wether has been the last 6years sitting outside :(
http://i165.photobucket.com/albums/u64/kevster240/20120402_214606.jpg
sill is shot
http://i165.photobucket.com/albums/u64/kevster240/20120402_214623.jpg
so is the o/s/r spring seat :(
http://i165.photobucket.com/albums/u64/kevster240/20120402_214614.jpg

[kevster]

so we maded a jig to start srippin her
http://i165.photobucket.com/albums/u64/kevster240/20120405_125158.jpg

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20120405_182306.jpg


not bad for 2 days work more then the last 6 years lol .

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20120405_155443.jpg

sorry phone pics lol , hopein to put a 2.0L cozzy turbo'd xe in her .

[scott.parker]

Jesus didn't realize you had a nova anymore! lol

[Austin_Nova16]

Wow Kev, I am well surprised! Good on you mate! Got a workshop at last....awesome!

Keep the progress coming dude. Catch up soon

[kevster]

Hay come on guys i will get it done this time . Austin how's things little one??

[kevster]

Jesus didn't realize you had a nova anymore! lol

Not nice dude

[Spudly]

Not nice dude




I dont think he meant it like that dude, (i assume youre thinking about your white one there) i think Scott was just meaning its been a while and thought youd moved on to other things now!

Had to lol at your comment to Austin as 'little one' :d

[kevster]

I know fella i was just messing with Scott , had this blue one before me white one :)

I didn't mean that Austin was small either as his is massive !!!! Lol

[Spudly]

I knows, I've met him a few times, tallest guy I've ever met, and have to say, the nicest too:thumb:

[kevster]

Well I have done a few more bits today I will post some pic in a bit battery tray is rotten need to remove the fire walk to get at it to do a proper job has anyone here done one lol.
Found some small holes in the floor too.

It is a complet bear shell now tho

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20120414_182319.jpg
http://i165.photobucket.com/albums/u64/kevster240/20120428_134642.jpg
http://i165.photobucket.com/albums/u64/kevster240/20120428_134723.jpg

[kevster]

Didnt think it was right when I saw it at first dew to size lol
http://i165.photobucket.com/albums/u64/kevster240/20120414_164235.jpg

[kevster]

I really don't know what colour to have her , what you guys think

[kevster]

small update did a small amount of work on her on the way home from work tonight .

two small plates and started to stich up the floor .

im not any good at welding tho lol still thought i would give it ago
http://i165.photobucket.com/albums/u64/kevster240/20120430_193331-1.jpg

http://i165.photobucket.com/albums/u64/kevster240/20120430_193324.jpg

http://i165.photobucket.com/albums/u64/kevster240/20120430_190348.jpg

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20120430_194547-1.jpg

http://i165.photobucket.com/albums/u64/kevster240/20120430_200522.jpg

http://i165.photobucket.com/albums/u64/kevster240/20120430_190310-1.jpg

try and get better as i go its alot to take on lol when all i do is fit tyres lol as a job

[kevster]

were really needs to be welded ??? and also were can i get a strenging kit from . will try my best to tidey up the parts i have done so far .

thanks for looking kevin

[_Jake]

I got my kit from LMF, not that i'd reccomend it, was complete dog****e.. Ive just finished welding my shell for a 2.0 and ive pretty much welded every seam i set my eyes on lol & your welding doesnt look too bad, seen alot worse on here!

[kevster]

ok cool thanks jake , i thought someone on here sold them :( will have to keep my eye out for them on ebay or somewere like that ,

im hopein to get the cage in soon too .

[_Jake]

Pretty sure autoworksnovasport or whatever his name is does them :)

[kevster]

have some rep+ fella

[Benn]

Only the engine bay seams really need welding up. And i'd be very happy with that welding.

[kevster]

Only the engine bay seams really need welding up. And i'd be very happy with that welding.ok cool tar ben , your nova still looking dam fine too bud !!!

i rember looking at it at pvs gettin soked lol

[Benn]

lol cheers dude, will be there again so come say hi.

[kevster]

small look at whats going in the nova i hope if all comes to plan kms t3 powered c20xe .


http://i165.photobucket.com/albums/u64/kevster240/20120402_165736-1.jpg

[kevster]

lol cheers dude, will be there again so come say hi.


will do i need to try and mingle a bit more , i prity much come up with austin and only really talk to a small few off here . lol
could say im shy lol

[Benn]

hahahaha well man up. And nice looking motor.

[kevster]

update on the cards , i had a few problems with money as a hole not going to bore you all with it tho lol ,
new workshop and taken my st off the road to try and sort out the money front .
pics up loading at mo .

sorry to all that i had aranged to get items off of mainly will f , pray and vaux count . i hope will can still trade in the future .

trying to do most of the body work my self to save money comments welcome as im not a body worker lol.

thanks kevin

[kevster]

st off the road :(
http://i165.photobucket.com/albums/u64/kevster240/20120625_201126.jpg

new home
http://i165.photobucket.com/albums/u64/kevster240/20120625_201142.jpg

cut out the rot from the battery tray
http://i165.photobucket.com/albums/u64/kevster240/20120701_165200.jpg
http://i165.photobucket.com/albums/u64/kevster240/20120701_165146.jpg

[kevster]

and my repair job lol please be nice lol
http://i165.photobucket.com/albums/u64/kevster240/20120707_195722.jpg

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20120707_195739.jpg

[kevster]

still need to smooth out the weld tho , just sprayed to stop the damp gettin to the exposed metal

[Iain]

Repair looks spot on

[kevster]

So ...... Time for a little update , not to much of a grate one tho. .
http://i165.photobucket.com/albums/u64/kevster240/20120712_220339_zps32a17acc.jpg
Made the spit from a bit of scaffold pole that my mate got ahold of.
Slapped a bit of hammer right on them .
http://i165.photobucket.com/albums/u64/kevster240/20120714_140741_zpsa79e89ec.jpg

And Then fitted them to the car , time to see if my math is any good
http://i165.photobucket.com/albums/u64/kevster240/20120821_192601_zps705f5770.jpg
Was well happy once she was in the air , means I can crack on and get the job done.

[kevster]

o/s/r arch and seal off tonight pics uploading , this body work is hard graft lol
repairs to iner arch's have been done also.
looking for a c20let now !!

[jafanan]

spit looks good, if i was ever to strip another car back to metal id be making one of them

[supernova.629]

Hows this going you got eny more work done

[kevster]

Sorry will update tonight ,

Thanks Kev

[Balley]

Nice repair pal!

[kevster]

Small update as on the iPad , done the battery tray , now to move on too the rear arch's and to replace the o/s seal.

http://i165.photobucket.com/albums/u64/kevster240/20121002_204634.jpg

Small amount of filler

http://i165.photobucket.com/albums/u64/kevster240/20121007_190527.jpg

[kevster]

Done I rolled the arch as well.

http://i165.photobucket.com/albums/u64/kevster240/20121007_224924.jpg

http://i165.photobucket.com/albums/u64/kevster240/20121007_225044.jpg

[kevster]

Rolled my other toy out and gave it a clean , as still waiting for the cover for her.

http://i165.photobucket.com/albums/u64/kevster240/20121027_165537.jpg

Thinking about selling to finance another nova lol

[16v Nova Kev]

Body work looks pretty good to me.

[kevster]

well i have now made a start on the o/s/ seal and arch but the inerarch needed a lot work dew to hidden rot:(
i went down the route of spot welddeing the seal on , then the outer arch the same as the the n/s/r .

i have also started to remove all the underseal and paint to see the state of that.
with the weather being so cold i need to get a space heater lol

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20120917_191200.jpg

Also started on the front inners too

[kevster]

Pic of my inner ach repair .
http://i165.photobucket.com/albums/u64/kevster240/20120924_203143.jpg

[kevster]

Seal cut off , had a small area that needed cleaning before I could put the seal on .
http://i165.photobucket.com/albums/u64/kevster240/20120911_195756.jpg

[kevster]

Seal all lined up grate so tacked it in place ,
http://i165.photobucket.com/albums/u64/kevster240/20121109_182107.jpg

[kevster]

A little filling was needed after flapping the weld.

http://i165.photobucket.com/albums/u64/kevster240/20121110_152504.jpg

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/20121109_202104.jpg

http://i165.photobucket.com/albums/u64/kevster240/20130107_201509.jpg

http://i165.photobucket.com/albums/u64/kevster240/20130206_201709.jpg

http://i165.photobucket.com/albums/u64/kevster240/20130206_201723.jpg

I'm not happy with the cage dew to the space diffrent's on the front bars , the n/s sits further forward then the o/s , anyone had the same trouble as me ?

http://i165.photobucket.com/albums/u64/kevster240/20130206_201745.jpg

And this is the other side

http://i165.photobucket.com/albums/u64/kevster240/20130206_201757.jpg

[kevster]

Well I've started to strip all the sealer off the under side the last few nights ,:thumb: and weld some plates were the cage bolts in . Not shore what todo about the spear wheel well.

I also welded some platform's on for better jacking points .

http://i165.photobucket.com/albums/u64/kevster240/20130128_192343.jpg
I welded platform's for the rears of the cage.
http://i165.photobucket.com/albums/u64/kevster240/20130208_201527.jpg

Thanks Kev

[kevster]

I would of thought the cage would of bolted strate to the shell but I needed to make those rear platforms , as anyone else had to do this ?

[kevster]

:wtf:lol

[kent14sr]

I have fitted Safety Devices and OMP cages in the past and they both fitted straight in without any platforms being needed.

However, I have known others to have to do what you have so its not unheard of!

[kevster]

I have fitted Safety Devices and OMP cages in the past and they both fitted straight in without any platforms being needed.

However, I have known others to have to do what you have so its not unheard of!

Good I was worried about it that's all thanks for the info pal.

[kevster]

started to srip all the under seal off (what a job that is ) lol
http://i165.photobucket.com/albums/u64/kevster240/20130114_211433-1.jpg
http://i165.photobucket.com/albums/u64/kevster240/20130114_211422-1.jpg
put some front spredder plates in
http://i165.photobucket.com/albums/u64/kevster240/20130215_203937.jpg
then cleaned all the area for some echt primer
http://i165.photobucket.com/albums/u64/kevster240/20130219_193309.jpg
http://i165.photobucket.com/albums/u64/kevster240/20130219_193251.jpg

and the cage in place

http://i165.photobucket.com/albums/u64/kevster240/20130207_212148.jpg

thanks for looking

[Benn]

Doing the floors a lovely job isn't it... All worth it in the end tho...

[kevster]

the only problem i got now is im waiting some bits to come in , oh yeah also got to fix the mrs's zafira think shes done the turbo :(

[kevster]

Doing the floors a lovely job isn't it... All worth it in the end tho...

yeah still got to do the rear too , but i dont know do i go all out and sheat it out flat and smooth it out ????

what you guys think .

[Benn]

As in the wheel well? Does it really make that much diff?

[kevster]

As in the wheel well? Does it really make that much diff?

yeah all the way down to the back of the seats ?? or not i saw a green nova turbo like thought it was quite cool

[Benn]

Up to you on that one.. Only way i look at it is, if you make the floor flat, the rear panel and bumper must act as a air dam...

[Edd]

Keep the wheel well

[kevster]

Well it's be a while since I've updated this thread , I've done quite a bit to this now and lost interest as it was never ending welding lol. So got a hold of another nova off a friend which was turbo powered and in total vauxhall , he lost interest dew to building a cosworth powered mk2 escort .

Will update with with photos later


thanks kev

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/cage/5A083B50-6AF6-43E7-9B2A-874C9B873441.jpg (http://s165.photobucket.com/user/kevster240/media/cage/5A083B50-6AF6-43E7-9B2A-874C9B873441.jpg.html)This is the shell , sorry about the quality of the photos there off my phone .
http://i165.photobucket.com/albums/u64/kevster240/cage/01B5B16C-A604-4641-8063-2CD3F5D52248.jpg (http://s165.photobucket.com/user/kevster240/media/cage/01B5B16C-A604-4641-8063-2CD3F5D52248.jpg.html)

This is the engine to go in :)
http://i165.photobucket.com/albums/u64/kevster240/cage/BCECD311-8262-4F3F-B2CE-D9F9E48BE45E.jpg (http://s165.photobucket.com/user/kevster240/media/cage/BCECD311-8262-4F3F-B2CE-D9F9E48BE45E.jpg.html)

[kevster]

I've book the car in for paint on Tuesday , I'm thinking blue as every white nova I've had ether dies of gets stolen .

http://i165.photobucket.com/albums/u64/kevster240/cage/73B635AE-EA00-4455-9AD9-160495F4A225.jpg (http://s165.photobucket.com/user/kevster240/media/cage/73B635AE-EA00-4455-9AD9-160495F4A225.jpg.html)Not to shore how I'm going to run fuel lines and the brake lines :(

[kevster]

Cars been dropped off to the body shop now ,

http://i165.photobucket.com/albums/u64/kevster240/cage/38CC33C7-CC56-451E-A772-965F8FAA9BC1.jpg (http://s165.photobucket.com/user/kevster240/media/cage/38CC33C7-CC56-451E-A772-965F8FAA9BC1.jpg.html)
http://i165.photobucket.com/albums/u64/kevster240/cage/7063495E-9F18-4B31-939F-FA42BBCD5AF3.jpg (http://s165.photobucket.com/user/kevster240/media/cage/7063495E-9F18-4B31-939F-FA42BBCD5AF3.jpg.html)
The fuel filler and o/s/r lower arch repaired
http://i165.photobucket.com/albums/u64/kevster240/cage/B2AA4E4E-302F-427D-9171-ED9DE07D8D10.jpg (http://s165.photobucket.com/user/kevster240/media/cage/B2AA4E4E-302F-427D-9171-ED9DE07D8D10.jpg.html)
I'm going to finish this one , well least try .

[kevster]

Inside is all rubbed down ready

http://i165.photobucket.com/albums/u64/kevster240/cage/C677629B-6172-48E5-9762-689E54319462.jpg (http://s165.photobucket.com/user/kevster240/media/cage/C677629B-6172-48E5-9762-689E54319462.jpg.html)

now for some colour what you guys think .?
http://i165.photobucket.com/albums/u64/kevster240/cage/0CE7F701-BE78-490C-8890-990720F70CAB.jpg (http://s165.photobucket.com/user/kevster240/media/cage/0CE7F701-BE78-490C-8890-990720F70CAB.jpg.html)

http://i165.photobucket.com/albums/u64/kevster240/cage/D55D7CFB-C5D9-40BD-87D6-29C01975F7B7.jpg (http://s165.photobucket.com/user/kevster240/media/cage/D55D7CFB-C5D9-40BD-87D6-29C01975F7B7.jpg.html)

I'm not to shore about the bumper colour , what do you people think ?

thanks Kev

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/cage/20C3BD1A-F6E4-46AF-BAA4-7346F645AC21.jpg (http://s165.photobucket.com/user/kevster240/media/cage/20C3BD1A-F6E4-46AF-BAA4-7346F645AC21.jpg.html)

[nova_niek]

As I was scrolling down, I read your "bumper colour" question. My initial thought was "antracite" and as I scrolled down, I spotted the pic with the bumper on. I think antracite is the way forward. Liking the blue shell! :thumb:

[nova_niek]

This is the engine to go in :)
http://i165.photobucket.com/albums/u64/kevster240/cage/BCECD311-8262-4F3F-B2CE-D9F9E48BE45E.jpg (http://s165.photobucket.com/user/kevster240/media/cage/BCECD311-8262-4F3F-B2CE-D9F9E48BE45E.jpg.html)

Pics like this should be in the 18+ section. lol

Looking mental with the rams horn exhaust manifold and custom intake plenum. What spec is the engine?

[kevster]

Pics like this should be in the 18+ section. lol

Looking mental with the rams horn exhaust manifold and custom intake plenum. What spec is the engine?

I'm not that grate with spec's but it's got .

nortec inlet manifold
nortec exhaust manifold
arrow rods
je pistons
oil jetted bottom end
highbrid t34
Newman cams
kms management
I mix of vw and vauxhall injection parts .
i don't really know what sort of power she's going to have lol

[Benn]

Loving the blue, much better choice. Love the rear turrets and brace. Is it joined to anything under the floor?
What's going on with the rear seat pan?

[kevster]

Seat pan and wheel well have both Been strengthened and made flat to fit tank and swirl pot .
im still thinking about which way to run it as don't want to much inside the car .

[kevster]

Loving the blue, much better choice. Love the rear turrets and brace. Is it joined to anything under the floor?
What's going on with the rear seat pan?
The rear turrets are mk1 and mk2 escort , thanks Ben took weeks to find a blue I like , and different

[scott.parker]

Who's car was this Dans? Or another long term members of here, as it's very familiar.
I'd be tempted to go full colour code on the bumpers, what colour is the shell? Breeze?

[Nick J]

Looks like R1ch's old shell that he did the bruntingthorpe bash in?

Nick.

[scott.parker]

Looks like R1ch's old shell that he did the bruntingthorpe bash in?

Nick.

That's it Nick, i knew it was a member from here's.

[kevster]

Lol it's my mates his name was Tom lol never been on png , it's Mexico blue a 1970's

[scott.parker]

Lol it's my mates his name was Tom lol never been on png , it's Mexico blue a 1970's

Really? lol sure ive seen it on here..

[kevster]

It's was on the total vax stand at pv next to rich's in 2008 I think it's was .

[kevster]

Right tonight I started to make a template for the speedo , this is how it ended up , need to get it sorted before dash gos to get flocked .
http://i165.photobucket.com/albums/u64/kevster240/cage/E4648E7F-D038-42B3-BD7E-9F9E3D1929A1.jpg (http://s165.photobucket.com/user/kevster240/media/cage/E4648E7F-D038-42B3-BD7E-9F9E3D1929A1.jpg.html)

http://i165.photobucket.com/albums/u64/kevster240/cage/69EB3D5C-1754-484A-989C-F50A5B07EC20.jpg (http://s165.photobucket.com/user/kevster240/media/cage/69EB3D5C-1754-484A-989C-F50A5B07EC20.jpg.html)

[kevster]

I'm not to happy with it , so mite have a rethink

[kevster]

Well got the rocker cover painted to the colour scheme

http://i165.photobucket.com/albums/u64/kevster240/white%20nova%20sri%20big/4C813959-C857-45BA-A477-3D16FF146E4A.jpg (http://s165.photobucket.com/user/kevster240/media/white%20nova%20sri%20big/4C813959-C857-45BA-A477-3D16FF146E4A.jpg.html)

Out sides painted now to ! Well pleased with it .


http://i165.photobucket.com/albums/u64/kevster240/white%20nova%20sri%20big/B0E17EAD-382A-452D-8084-AAC592B2E5D9.jpg (http://s165.photobucket.com/user/kevster240/media/white%20nova%20sri%20big/B0E17EAD-382A-452D-8084-AAC592B2E5D9.jpg.html)Inside

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/white%20nova%20sri%20big/99A311DB-30E8-48F1-8657-F7BBB400FFF4.jpg (http://s165.photobucket.com/user/kevster240/media/white%20nova%20sri%20big/99A311DB-30E8-48F1-8657-F7BBB400FFF4.jpg.html)

[millworm]

Love that colour scheme

[kevster]

Right not much of update , under sealed the whole of the underside ,
:thumb:
http://i165.photobucket.com/albums/u64/kevster240/cage/93B7C47C-6ECA-4087-8867-BFE0DCBD3A85.jpg (http://s165.photobucket.com/user/kevster240/media/cage/93B7C47C-6ECA-4087-8867-BFE0DCBD3A85.jpg.html)

Right then this turned up in the post , I'm trying to think of the best way of mounting it to the floor pan
It's giving me a right head ache !!!!

http://i165.photobucket.com/albums/u64/kevster240/cage/A88DADB6-A01D-4D7A-A8E3-EE1EB85AB860_1.jpg (http://s165.photobucket.com/user/kevster240/media/cage/A88DADB6-A01D-4D7A-A8E3-EE1EB85AB860_1.jpg.html)


any help would be grate lol thanks kev

[Benn]

Blue looks great.

[kevster]

I need to construct a box section frame for the peddle box to sit on to prevent flex when brakeing hard , for the cost I can't really complain tho .

[kevster]

Update on its way

[kevster]

Thinking of brakein now dew to , moving out
http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/7C1D8E42-2199-4D44-B07B-F383F1049357.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/7C1D8E42-2199-4D44-B07B-F383F1049357.jpg.html)

[novadave24]

that looks beast mate nooooo don't break it :(

[Rob H]

If you decide to break pm me a price for the whole thing before you do.

[kevster]

I will not sell as a hole as worth much more in parts sorry

[Benn]

Thats a real shame as i really like this project.

But can i ask if you do, id like the alloy rad if its ok.
Let me know if you do.
As i can collect.

[kevster]

Right I decided to keep the old money pit , will do a update once photos upload ��

[nova_niek]

Right I decided to keep the old money pit , will do a update once photos upload ��

Good. :thumb:

[kevster]

Right up date time I built the engine up which is a c20let with
t34 hybrid
nortec inlet
nortec exhaust manifold
steal rods (arrow)
steal pistons (je)
jetted bottom end
uprated oil pump
baffled sump
modified oil pick up
kent cams
kent pulleys
gas flowed head
valve spring and valves uprated
http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG-20150118-WA0010.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG-20150118-WA0010.jpg.html)

i then had to fit the helix paddle clutch and lighten fly wheel and mate it up to the gear box which I have a qwafe diff fitted

Then I had to drop the lump in the hole with out damaging the paint lol
http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150204_194438.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150204_194438.jpg.html)

ive had a go of making my own an-3 brake line also you can see that in the above photo.

i will let the rest of the photos do the talking.

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150204_194438.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150204_194438.jpg.html)

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/FB_IMG_1422471720141.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/FB_IMG_1422471720141.jpg.html)

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150204_194249.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150204_194249.jpg.html)

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150204_194338.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150204_194338.jpg.html)

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150204_194223.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150204_194223.jpg.html)

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG-20150128-WA0002.jpeg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG-20150128-WA0002.jpeg.html)

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150204_202959.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150204_202959.jpg.html)

Rear disc beam fitted

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150204_194353.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150204_194353.jpg.html)

[kevster]

This will be the front brake set up once I've got some hangers made

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG-20150118-WA0001.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG-20150118-WA0001.jpg.html)

[kevster]

Uploading on a iPad is hard work lol , thanks for looking

[Iain]

Cracking work love the trick bits you don't usually see

I don't remember the history of this, going to go back and look for underside pics of the modified floorpan and rear strut bracing!

[josh-sri]

This looks like it will be a weapon when finished, as above I think I need to read this from the beginning, I love the way everything has been done to a good standard rather than just trying to cram it all in. That turbo brace looks great too, did you make that up yourself?

[kevster]

It was fabricated by my mate Tom , I'm trying to get it done for pvs

[Benn]

hahaha 2+2 and now i see why i didn't get it.

[Will F]

Looks like it should go well! Not sure the F20 will enjoy the torque though! lol

[kevster]

Looks like it should go well! Not sure the F20 will enjoy the torque though! lol

Previous let was running 301bhp for three years on a f20 fine .
But that was with a t3 turbo on Kms engine management

[Jonesfach]

I like the Olympic blue mk2 escort....now that looks a proper car.

sorry to go off topic. Could not help it..

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150321_203154.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150321_203154.jpg.html)


http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150321_204947.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150321_204947.jpg.html)

small update ��

[Benn]

Love how far forward your rad is...

Where have the Porsche brakes gone?

[kevster]

Love how far forward your rad is...

Where have the Porsche brakes gone?

porsche brakes are on the back bench dew to need to use the £300 brackets cost, need money on other things on the build ,

The rad is about level where the bottom of the grill was , it's needed dew to the size of the turbo and manifold

[Benn]

£300? Sh*t! Yeah i took it the turbo was along father out that a k16. Looks great tho.

[kevster]

I would of liked to of had it all behind the bumper but there's just not room to

[nova.mike]

Great build so far keep the updates coming (Y)

[TWAG]

porsche brakes are on the back bench dew to need to use the £300 brackets cost, need money on other things on the build ,

The rad is about level where the bottom of the grill was , it's needed dew to the size of the turbo and manifold

is that the cost to buy brackets or have them made?

ive bought some Ally bar for £25, made a drawing and the guys at work are machining them for me. Not sure what the cost would be to pay someone to machine them but can't imagine it would be that much.

[brucer]

Nice build kev, could you have turned the compressor cover round to point it downwards to route the pipework. Seems like a huge space to be used just for the hose.

[kevster]

is that the cost to buy brackets or have them made?

ive bought some Ally bar for £25, made a drawing and the guys at work are machining them for me. Not sure what the cost would be to pay someone to machine them but can't imagine it would be that much.


Thats to to have them jaded oem looking , at a company neer me , if I had access to a machine I would of given it a go , I did think it was a bit pricey

[kevster]

Nice build kev, could you have turned the compressor cover round to point it downwards to route the pipework. Seems like a huge space to be used just for the hose.

I did think of this but dew to the size of the down pipe it's would be tight plus I have ran the coolant pipes and oil breather pipe there to , I agree it would look much better tho :cry:

[kevster]

Before the rebuild

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/image.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/image.jpg.html)

[kevster]

I'm off this week to try and get as much done as poss

[Benn]

Oh i didn't know it was that one...

[kevster]

right small update ..
got a new thinking seat off my mate Darren ie the smokers corner lol

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20150331_085124.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20150331_085124.jpg.html)

ive been takeing my time a bit so I took the week off work to get my ass in to gear .. I stared off by putting the fuel tank in and pumps in to work out the fittings I will need to get ..

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20150327_214220.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20150327_214220.jpg.html)

thought that looked a bit like they were a little close together , but got a idea what fittings would be needed and routed it like this ,

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150330_190052.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150330_190052.jpg.html)

but ran out of hose :mad:

[kevster]

so thought I you start to tackle the wiring lol it was a right mess ..


http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20150319_104613_2.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20150319_104613_2.jpg.html)

managed to work it all out and thought it would be better to fit it in the car before adding length to it .

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/1427916670127.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/1427916670127.jpg.html)

that's the length added to the light loom lol I ran it on the new front cross member .. I had to cut the kms loom to on the air temp sencer and water temp , also the coil as im going to be using a vw one as it had a ignition driver built in un like the Vauxhall one.
ive not finished but this is how its looking so far..


http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150402_215712.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150402_215712.jpg.html)

but I did get round to finishing the fuel lines

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20150402_205220.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20150402_205220.jpg.html)

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20150402_205134.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20150402_205134.jpg.html)

[kevster]

just got this to sort out inside ..

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG-20150331-WA0004.jpeg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG-20150331-WA0004.jpeg.html)

don't really know what to do about a grill to ...

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20150402_015750.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20150402_015750.jpg.html)

[peester]

jeez, that front end looks the business.. just paint the grille; done. Heh.

[Benn]

Grille looks ok, just paint it blue.

[scott.parker]

I'm glad you didn't give up on this dude, it's turning into an awesome build! Yeah go with the grill as you have it, it's better make it look good then just opt for no grill laziness..

[kevster]

I need to find another grill now , thank for the kind words , the out side will need paint again as in places is not tip top, and I really don't think it will make Pvs , what's the next show ?

[Benn]

Shut up pussy. It will make PVS.

Use that grille, plastic weld in some extra plastic for strength and add a single slat at the top. Bit of blue and boom.

[kevster]

Ok ok , will sort that out tonight

[Benn]

Nice and easy.

[kevster]

Right I'm getting the right ass with this bloody car ! It's costing me a small fortune, I may have to sell my parts from the other build I have going on :cry:

[kevster]

It's moved and been washed !!

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150413_201116.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150413_201116.jpg.html)

you can see the colour better outside too :)

[Iain]

Lovely colour :)

[bazzap8389]

^ Agreed. Looks great!

[Benn]

Right I'm getting the right ass with this bloody car ! It's costing me a small fortune, I may have to sell my parts from the other build I have going on :cry:

What else you got going on?

[kevster]

Well I may of sold my St3 and got a 3door cozzie :thumb:, also got the other nova I'm building Ben

[kevster]

Lovely colour :)

1964 porche Mexico blue

[kevster]

^ Agreed. Looks great!

thanks :thumb:

[Benn]

Another Nova you say?

[kevster]

Yeah lol c20xe build I've rebuild the shell lol my old blue one
http://i165.photobucket.com/albums/u64/kevster240/20121007_225620.jpg (http://s165.photobucket.com/user/kevster240/media/20121007_225620.jpg.html)

[kevster]

I should be taking delivery of the last bit to finish the turbo build this week ,

fully flocked dash
stack dash
stack gauges
stack sencers
cosworth oil breather oil seprater
carbon boost pipes and trims
wide band setup
fuel pressure reg
small odessy battrey
kill switch and pull
turbo coolant lines
throttle cable parts
heat protection parts
group a air filter
carboun door and boot trims
boost controler
and livery :thumb:

and a a few little dressing parts

[Benn]

Nice.

Rad bigger enough in the white one?

[kevster]

Nice.

Rad bigger enough in the white one?
Lol the White one is now blue lol

[bazzap8389]

Carbon boost pipes? Where you getting that from? :)

[kevster]

Carbon boost pipes? Where you getting that from? :)

a friend of mine , he's makeing some but weather the any good I may just use it as a sleave over alloy tho

[kevster]

Small up date ecu and fuel systems plumed in , vx220 dash wired in and fully working , KMs wideband sorted , going to bin the cozzie greens for some 1000cc seamans injecters , jobs till done fill with oil and gear oil , make a exhaust and oh yeah fuel

got to run it in on old map for 500 miles , then get someone that deals with Kms to do mapping

[Benn]

Pop by me on Sunday, that will give you a few miles..lol

[kevster]

No jokes Ben I will need to once moted

[Benn]

Carry on..lol Just let me know before you come..

[scott.parker]

So..... Is this running now?

[kevster]

It was running , cam belt ider shat it's self tonight new kit tomorrow night

[Benn]

Belt didn't slip or anything?

[kevster]

Ready for mot now

[kevster]

well i as you may of seen it maded it to pv ,but i never got to run it dew to the clutch slave crappin its self on the way up ,
well ive replaced that now , had it mapped but the greens are maxin out at 310bhp ,
i will be replaceing them with 750cc seamens and changeing the kms to omex 600 in the winter dew to the facility to run more then one map ie road ,track and 1\4 mile .

ive got some new road tyres 40 16s , new coilovers for the front so i can drop it as its a bit high lol

[kevster]

will do a update on this one night this week ive done about 1000 miles

[nova_niek]

Cool, keep us posted on updates.

Why the change from KMS to Omex? More features like switchable maps?

[kevster]

Not much of a update but I've blown the core in the rad so it's looking rather sorry for its self lol

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20160317_202041.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20160317_202041.jpg.html)

[nova_niek]

Running too much pressure, or a faulty intercooler core? We all know there is no such thing as too much pressure. lol

[kevster]

I'm not to sure why the radiator did what it did . All I know is it's costing me a small fortune this bloody car

[kevster]

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150402_215654.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150402_215654.jpg.html)

http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/IMG_20150402_205220.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/IMG_20150402_205220.jpg.html)


http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/20150413_210155.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/20150413_210155.jpg.html)

[nova_niek]

Looking brutal :thumb:

[AudiKl]

Actualy I just posted all of the WIP pictures I had, so the ones without the body pannels are just from back when the other pannels werent made =P

[kevster]

Actualy I just posted all of the WIP pictures I had, so the ones without the body pannels are just from back when the other pannels werent made =P


Really ...?

[kevster]

Thinking I should really put a proper update on this build .

[scott.parker]

Go on the dude....

[totalnova]

Is this a Porsche colour? I looks familiar but it's hard to tell from an iPad screen.
Nick

[Benn]

Thinking I should really put a proper update on this build .

Yea get on with it.

[brucer]

Update Update Update Kevster!

P.S you coming on the PNG stand for PVS this year?

[kevster]

Go on the dude....
ok I will lol


Is this a Porsche colour? I looks familiar but it's hard to tell from an iPad screen.
Nick

yeah 1964 mexico blue


Yea get on with it.

up loading photos I forgot how to lol


Update Update Update Kevster!

P.S you coming on the PNG stand for PVS this year?

I was thinking about it matey ... I want to run it as much as I can this year ! , I know I say it every year but meh lol

[kevster]

Right i think its about time i updated this thread .....

Frome the above photos u can see its nearly finished . i had some more paint work done but found a few areas i was not happy with ..... so i rubbed the car down with 1500 and then 2000 and then 3000 and got a good mate to mop the hole car .
http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/CC9B183B-01FA-4A4D-8EA4-E4828ECA1A5B.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/CC9B183B-01FA-4A4D-8EA4-E4828ECA1A5B.jpg.html)

[kevster]

and this was the end result ..
http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/653DD0C3-A5D5-4807-9E85-6FE42565C6EB.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/653DD0C3-A5D5-4807-9E85-6FE42565C6EB.jpg.html)

[nova_niek]

and this was the end result ..
http://i165.photobucket.com/albums/u64/kevster240/Mobile%20Uploads/653DD0C3-A5D5-4807-9E85-6FE42565C6EB.jpg (http://s165.photobucket.com/user/kevster240/media/Mobile%20Uploads/653DD0C3-A5D5-4807-9E85-6FE42565C6EB.jpg.html)
Wow! Shinier than a monkeys thingie in moonlight. 👍

sent from my Nokia 6310i using the keypad

[Benn]

Very nice Kev, looks great. Deffo have to pop down in the summer.