Gearbox/Clutch problem

[SKoob]

I've just fitted an F13CR to my nova, it had an F15 on there previously, the problem is that it doesn't seem to release the clutch :confused: i've taken the inspection cover off and looked and the thrust bearing is touching the plate when the arm is fully extended.

What i'd like to know is if there is a way to adjust the bearing in relation to the arm or if the bearings are different and interchangable?

Either way I know the box is going to have to come off again :mad:

[Adam]

Hmm, it should work fine.
My f15(pretty much identical to f13) fitted fine and realised the clutch fine, mine was a f10 size clutch.

Perhaps theres a problem with the clutch lever on the box...

[SKoob]

Hmm, it should work fine.
My f15(pretty much identical to f13) fitted fine and realised the clutch fine, mine was a f10 size clutch.

Perhaps theres a problem with the clutch lever on the box...

All seems fine to me, I know the previous owner of the engine ran an F15 so not sure if the clutch is designed for it or not :confused:

[Adam]

Ye it should work fine.
Maybe the release bearing is getting jammed somehow...