engine rebuild

[nov4801]

im rebuilding a 1.6 gsi engine and was wondering if any of you lot know where i can get parts from, not after standard parts either

[flashbang]

well what parts

[nov4801]

cams pistons etc the whole lot is bein dne

[flashbang]

stick to stnd m8 but add some t40s or a turbo

[nov4801]

engine been sat for a year or so and its already out the car so want to make sure everything is runnig ok so thought i might aswell change the parts on it to be safe

[london_chris]

yea i would put all performance parts in if i was you,look on ebay for cheap bits but i dont know anywhere that sells new parts for rebuild, cams etc you can get at potn.com and demon-tweeks.com and other leading sites

[JSeymour]

stick to stnd m8 but add some t40s or a turbo

you really are a dick

[Novadex]

you really are a dick
my thoughts exacley :roll:

[Stuart]

nov4801, What do you want from the engine?

do you just want it a little perkier than std, a bit more tuned than that or kind of "max"(ish) spec for the engine?

get the bores checked to see if they require a rebore or not, but usually a 0.5mm overbore and std pistons is fine.

essentially read my 1.4 tuning guide in my sig link but think 1.6 rather than 1.4 lol Once youve decided your spec then you can hunt for prices better.

[Chris]

stick to stnd m8 but add some t40s or a turbo

http://www.epsilones.com/imagenes/star-trek/poker-hawkins.jpg

[nov4801]

nov4801, What do you want from the engine?

do you just want it a little perkier than std, a bit more tuned than that or kind of "max"(ish) spec for the engine?

get the bores checked to see if they require a rebore or not, but usually a 0.5mm overbore and std pistons is fine.

essentially read my 1.4 tuning guide in my sig link but think 1.6 rather than 1.4 lol Once youve decided your spec then you can hunt for prices better.
#cheers stu i aint to sure yet as i will be buyin parts here and there as money is tight as usual so will take about 2-3 months want summit that is quicker than std but not ott

[tom reid]

I can supply you with all the parts you require, let me know when you're ready