2.0 16v conversion parts.

[JSeymour]

what are the most important parts i need?

so far all i have is the chassis plate kit, about to order the engine mount kit n gear box spacer and will be getting it fully seam welded.

should i buy competition engine mount/s, driveshafts and hubs..etc? or will moddified standard parts do?

the engines standard btw.

ive looked at the feature pages and wips but not found much info.

also im on a bugdet so take it easylol

cheers john

[eoinnova]

http://www.topbuzz.co.uk/
loada info on 2ltr conversion on this site

[Adam]

Std gte shafts, and std nova hubs are fine.

If on a budget you can stiffen up the std engine mounts with a shed load of tigerseal. Get a old mount, cut the rubber up, use the rubber to fill the large gaps in the mount, then put tigerseal all around it.

When the tigerseal cures(may take about a week if applied thickly) it will have made the mount hard to move about=Stiffer.

Remember you will also need mod/weld the xe exhaust to fit the nova system.

And change tank/fuel pump depending on what model nova you have.

[JSeymour]

cheers mate, i wasnt to sure as there seems to be alot of different parts available that you dont actualy need as standard will do.

im on the hunt for a tank and pump and the welding/exhaust isnt a problem.

will tigerseal the mounts aswel, thanks again mate.