DOORS!!

[Anonymous]

Hi guys. Im am deperatly trying to get my door off. Does anyone know how I can get the hinges off. Ive alreadu got two screw drivers stuck.

Cheers

[Anonymous]

got a haynes manual?

andrew.tunnicliffe@whitbread.com
ANDY@WISEWOOD.NET

[Anonymous]

door pin remover from halfords ?20

--- Novaload technical support open 24hrs ---
--- Phone/SMS Support 24hrs ---
--- Workshop services 6pm - 11pm Mon - Fri, 9am - 11pm Sat/Sun ---
--- 16v engine fitting advice ---

[Anonymous]

angle grinder?

--------------------
Kill a Squirrel !!!
Not your speed !!!
--------------------

[Anonymous]

I cut down some petal rod(a bonnet stay actually) and chiselled them out,then used some grips to twist these out,you may find that the doors ar a bit of a sod to put back on,as mine seemed to be slightly out,then again,I went for mk2 doors,my next task is changint 1 soor on the gte,Im worried over tje central locking loom etc as a problem :(

clear repeaters,lowered and more performance in the pipe line :)

[Anonymous]

oh and use corsa pins whe u refit much better
cl is not a prob jusgt drill the door where the dot is

--- Novaload technical support open 24hrs ---
--- Phone/SMS Support 24hrs ---
--- Workshop services 6pm - 11pm Mon - Fri, 9am - 11pm Sat/Sun ---
--- 16v engine fitting advice ---

[Anonymous]

Cheers guys, these things are never straight forward. I did manage to get one of the stuck screwdrivers out today. Just one to go now oh, and a broken alan key!!!!!!(i used it to try and push the screwdriver out))

X-( X-(

[Anonymous]

try taking the weight off the doors at the ends so teh pins dont have so much load on em.

Ohh Ahhhh
Ger Orf Moy LAAANNNDDD

Traater, Traila, Comboine Bailer

[Anonymous]

I found that a brake pin remover worked well.

[Anonymous]

Soak em in wd40 for a while!

[Anonymous]

i reversed my car with the door open and it ripped of! this is not recomended though but it gets it off