Any differences in C14NZ and 14NV block?

[tom_beverley]

Is the crank the same/bores and stroke?

Also any notable differences to the 14NV?

Any help much appreciated, thanks!

Tom

[mikey14sr]

EPC lists the pistons as different part numbers, crank and rods use the same for both engines. The SE has higher compression than the NV/NZ so thats probably the reason for the pistons being different. Bore and stroke are the same.

[tom_beverley]

Thanks mate,

phew, was worried I'd have to take my crank out to build up the new block!

Pistons are not going to be standard anyway mate, but as long as the crank/stroke and bore are the same thats all that matters!

[Adam]

The SE pistons are different as mentioned, higher cr.

14nv and C14nz are identical, well they looked it when i took my old c14nz apart and compared it to my 14nv.

[tom_beverley]

Yea cheers, I had a look in my Haynes today and the bore and stroke are indentical in 1400 range. :thumb: