View Full Version : im after a 1.6 8v engine
valverguy
01-02-07, 08:49 PM
Must be local to wirral area. Not bothered if its c16se or e16se. So long as it comes with the following
engine
box
loom
ecu
ancilleries
afm (e16se)
Cash waiting. Thankyou
valverguy
02-02-07, 05:34 PM
come on people?
valverguy
03-02-07, 02:23 PM
come on guys somebody must be selling a gte/gsi engine!
saloonwoody
03-02-07, 05:47 PM
Iv Got A Bottom End ? May B Able To Sort A Head N Stuff ???
valverguy
04-02-07, 09:49 PM
want a full conversion package sorry. Unless you can source a head rocker cover loom ecu etc etc. and then prove its a runner?
benthehash
06-02-07, 01:54 AM
whole shebang gte was runner needs new head gasket no shafts or clutch ?120 basingstoke
valverguy
06-02-07, 08:34 AM
it needs a headgasket and you want 120 for it?
benthehash
06-02-07, 09:00 AM
the head gasket wasn't gone i needed it to do the compression ratio on my new engine.
valverguy
08-02-07, 03:51 PM
still needed people.
valverguy
10-02-07, 01:47 PM
COME ON GUYS somebody must have a 1.6 8v engine knocking about who lives close to me :( need to get on with this project
dave_rand
10-02-07, 06:58 PM
i have one still in car can been saying running
valverguy
11-02-07, 03:01 PM
wheres billingham mate?
dave_rand
11-02-07, 08:16 PM
north east mate teeside
valverguy
12-02-07, 10:47 AM
hmm i dont think its that far from me. Im northwest wirral. i will u2u you
ive got the 1 in my track car at the mo that should be coming out soon. it needs some work as got a bit smokey but would come with gearbox /shafts 2 spare heads 2 spare cams and covers ecu loome 2x bottom ends and i think it has a piper cross or ram air panel filter in it aswel. all yours for ?70 if you want to come get it. i would need a little notice first as still in my track car at the mo.
pm me on lates at the mo so would get back to you later if interested.
dave_rand
13-02-07, 04:01 PM
wirral aint that liverpool way?
valverguy
13-02-07, 05:18 PM
yes sir it is. just over the water. im in desperate need now. I want some gsi power in my car :(
dave_rand
13-02-07, 05:36 PM
went there the other week to pick an engine up for my mates astra
well its there if u want it still in the car at the min probs gonna be removed this weekend
valverguy
13-02-07, 08:33 PM
is there no way to deliver mate?
dave_rand
13-02-07, 10:40 PM
if u can find a courier yeh ill put it on a pallet or i cud have a word with me mate see hwo much he wud charge to bring it down in his trailor
valverguy
14-02-07, 10:58 AM
have a word with your mate. see what he wants for it. Meanwhiles ill be looking at some courriers. Ta
dave_rand
15-02-07, 12:19 PM
mates busy for the next few weekends soo no can do am afraid sorry
valverguy
17-02-07, 02:14 AM
still needed people. as close to wirral as possible. or at least in bits (head bottom end and ancilleries etc so i can get it in my car!
novarally
17-02-07, 11:33 AM
I've got a Nova GTE 1600cc 8 valve engine with all the bits you need.
E-mail:
colinesmith@aol.com
valverguy
17-02-07, 12:13 PM
Ive often seen the bits you sell mate. Problem is the distance you are from me :( otherwise by now im sure id have had loads of stuff of you. Sorry.
dave_rand
17-02-07, 05:27 PM
ill strip mine down for u if u like
u can get a engine in the back of a car thou
i put a redtop in the back of a 106
valverguy
17-02-07, 06:51 PM
LMAO a redtop in the back of a 106. Ill be doing it in my skoda octavia tdi so i doubt ill have any trouble. Unfortuantly ur still hundreds of miles away and like a nice 8 hour round trip lol.
valverguy
17-02-07, 06:52 PM
PLEASE somebody within an hours drive with a 1.6 8v gte gsi or even astra si engine. Im begging you strip it down and let me pick it up.
dave_rand
18-02-07, 12:49 AM
8 hours is ur granny driving or something its 2 hours each way max
valverguy
18-02-07, 12:49 PM
i just did an auto route to billingham. said like 4 hours each way. unless it was the wrong billingham?
dave_rand
18-02-07, 06:47 PM
dunno i went to wirral the other week to pick an engine up with a mate only took us 2hours 45 mins and we were towing a trailor
valverguy
19-02-07, 08:56 PM
Anyone? Close to wirral?
valverguy
20-02-07, 11:21 PM
Come on guys really need e/c16se engine please with loom and ancilleries. Even if you have one which needs a rebuild or is in pieces let me know please. as close to north west as possible.
dave_rand
21-02-07, 11:55 AM
mite aswell just come and get mine its a minter
valverguy
21-02-07, 12:37 PM
Im seriously concidering it dave. I cant believe i cannot find an engine closer than you :( Im gettin desperate as well now :( If i havent found an engine by the weekend dave. Im coming for yours.
dave_rand
21-02-07, 04:03 PM
well its still in the car at the minute so ill need a days notice to take it out
valverguy
26-02-07, 07:29 PM
dont need ne more. the car this engine was intended for has been wrote off. sorry for wasting peoples time :(
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.