bridged

[ianglanister]

alrite lad first time been on the new and imporved novaload so want to say its looking very good, what it is im abit **** when it comes to amps, ive got a jbl 400watt amp and want to put a sub on it. do i wire the sub up to the bridged left+ and right- or do i just wire it up as normal i.e left+ to left-? thanks for any help lads!

[ianglanister]

also forgot to ask would it do harm if i wired 2 remote cables from each amp to one remote terminal on the head unit? thanks Ian

[Asa-James]

i'd wire the sub bridged, and for the second question, just use a splitter, or see if one amp has a remote out, in which case link them

[Jack]

Should be able to split the remote cable.

Check the amp manual to see if it can be bridged - it'll also tell you which channels to connect. If you don't have a manual, post up the model number and/or have a look on the manufacturer's website.

[ianglanister]

right both the amps have got rca connections obv, right and left +/- terminals then ground,remote and +12v so would id damage it if i just joined the 2 remote cables to connect them to the headunit? thanks very much. Ian ive got a jbl 400watt gto 2000 2/1channel amp and a maystar qxt 250 300watt amp thanks Ian

[Lucky Luke!]

Yes you can bridge the amp, it should be clearly labelled on the speaker terminals as to which ones you use. You can use 2 remote cables if you wish as it only acts as a turn on wire. However you might as well bridge it off the other amp.