I Need Heip

[jedi]

Has anyone got a picture of a 1.4 sr coil please

[burgo]

what is it you need a picture of exactly??

[jedi]

I need a picture of the coil because I have just got one to convert my 1.6 to the t40 but the one i have got seems to have wires where i think there should not be. I wanted to to see if I was right.

[novahaulin']

the coils only have 2 wires on them, a positive and a negative which are at either side of the king lead.

[Adam]

1.4SR has a long cylindrical coil.

They have two connections on the front(for pos and neg) and a two plugs on the top.
You can use the two bolt/nut connections, or if you have the loom it just plugs in the top of the coil

[jedi]

The problem is i am having is that i am putting a 1.6 t40 into a 1.2 merit shell with the 1.2 loom . Would it be better to put a 1.4 sr loom in?

[Adam]

You will need the 1.4SR ignition coil loom, as it plugs into the dizzy, coil and ign module.

[Riggy]

you might have it but you havent said , but like ad said you need the dizzy and loom aswell

[jedi]

i have the dizzy and coil.So it looks like i need a loom:cry:
thanks for your help