PDA

View Full Version : ROUND port t40 inlet-GTE/GSI/SRI


Adam
22-01-07, 06:46 PM
As above.
To fit weber 40s.
And a 14/16SE head.

:)
burgo
22-01-07, 08:51 PM
i need glasses
baby-gal
22-01-07, 09:01 PM
just use an irmscher inlet manafold
Adam
23-01-07, 08:23 PM
i need glasses
:confused:What,Lol.

Baby-gal-I already have a irmscher inlet, but it wont match the head right and will loose power.
burgo
23-01-07, 08:27 PM
:confused:What,Lol.

Baby-gal-I already have a irmscher inlet, but it wont match the head right and will loose power.i replied to a different massage in here
baby-gal
23-01-07, 08:49 PM
i aint lost any power
Adam
24-01-07, 12:43 AM
i replied to a different massage in here
Lol



Baby-gal-How do you know if you've never used a proper round port inlet? Lol
You dont know what the gains might be with a round port one

The irmscher one will direct air into the face of the head instead of directly into the port, so it has to loose some power. Not sure how much tho.
Adam
24-01-07, 07:27 PM
Needed ASAP :)
Adam
27-01-07, 05:17 PM
Ttt
baby-gal
27-01-07, 06:54 PM
i manifold i got was matched to the head
Adam
27-01-07, 07:48 PM
Do you have a 1400 head?
or 12/1300?

To match a irmscher inlet to a 1.4sri head would need either the inlet tig welding, or the head ports grinding out.
baby-gal
27-01-07, 08:14 PM
1400 head had 2 manifols so could grind one 2 match
Adam
30-01-07, 01:47 PM
Bumperoo