1.4nv still non starter

[twonovasdan]

tried every thing you all said but still no joy :confused: but it did try to go if i wiggled earth from module very:confused: please help if you can cheers dan

[Riggy]

is it giving of a spark ?

[twonovasdan]

no spark when earth connected to gearbox

[Riggy]

you sure that the mini loom is pluged in ,as it wont spark without it ,

also the moduale might be goosed

but if its wired up with black to your old coil black , brown to earth and green to the rev counter and the loom is plugged in then it should work

[twonovasdan]

new 6pin module all connected with mini loom not sure which way to wire coil wires ie green to green and black to black before they go into module

[Adam]

You wont need wire anything if you have the mini loom.
As its self contained and all wired correctly.
The only wires you need to connect are 3 on a plug, brown-earth
black-12v ign, green-tacho.
The rest is all wired correctly.

If those wires are connected then it will spark if you have the 14nv dizzy too.

If it doesn't spark then its wiring fault, dodgy coil.
Try connected the earth to another location.

[chunky6969]

yeh is the multiplug on the coil? they can come off really easily ..a cable tie sorted mine...and the check the rotor arm ...no-one ever bothers changing it ..and if its no meat on it it obviously wont make contact with the dizzi cap