Nova 1.4sri Head and...

[NovaHopeful]

Hi Guys I am after a Nova 1.4SR or SRI Head or whole engine inc. loom + ecu.

Nova SR Cam.

If anyone is looking to sell these, please let me know

Cheers

[sim0ng]

the C14SE used the same head as the C14NZ I think but just used a slightly larger cam and of course had a different inlet but the main block was the same as the NZ... Will see if my old engine has been chucked out yet, if not I'll see if I can get the head off it for you...

where abouts are you as its quite heavy so I'd be expecting it to cost more then its worth to post... best option is to look around the corsa/novas/astras and maybe even the 1.6 cavaliers in your local scrappy??

[loggyboy]

the C14SE used the same head as the C14NZ I think but just used a slightly larger cam and of course had a different inlet but the main block was the same as the NZ... Will see if my old engine has been chucked out yet, if not I'll see if I can get the head off it for you...

COMPLETELY WRONG :roll:

the c14se was a unique head with large inlet valves to that of the NZ, its a much better head and is often used to upgrade.

I have a complete sri engine and loom ecu (but crank/bottom end is shot) the head is very good, done 120k, 20k since headgasket and skim, new inlet valves, new rockers and achieved a 16.8 1/4 mile. located in basingstoke - where are you?

[NovaHopeful]

Hi Loggyboy,

I am in Gloucestershire,

How much are you looking for, for the head, or the whole lot?

Any ideas on what the cost of postage may be?


Many thanks

[NovaHopeful]

[quote=sim0ng]the C14SE used the same head as the C14NZ I think but just used a slightly larger cam and of course had a different inlet but the main block was the same as the NZ... Will see if my old engine has been chucked out yet, if not I'll see if I can get the head off it for you...

Is that a SR head you have?

Cheers

[LUV2XLR8]

i have a 1.4 sr cam for sale pm me

[womble sri]

i have an sr head and sri bottom end. reason being i put the sri head on the sr bottom end. let me know i have the sr carn and the sri injectors so you could have either although the sri inlet would not fit the sri inlet. but if you want to just have the bottom end and mateys ^ head than ill split it not sure about postage costs it will probably double the total price! im in north hertfordshire.

[loggyboy]

Hi Loggyboy,
I am in Gloucestershire,
How much are you looking for, for the head, or the whole lot?
Any ideas on what the cost of postage may be?
Many thanks

It would probly cost more than the engines worth. Ive no idea how you get an engine sent, A pallete and a willing courier i guess.

[novataken18]

ive got a nova im breaking with all that it with 80000 miles on the engine how much u looking to pay

[Asa-James]

i got the cam, carrier, and the head which was recently re-con'd (new valve stem oil seals and valves ground in) used as a donor head for my car while i did mine up, worked great. i also have a brand new dizzy for the cam (completely unused) and plug leads. i'll take ?50 the lot, the only problem is i'm near south manchester, but if you want to meet me half way (Birmingham-ish) i'll ask for another tenner for petrol. i'll get a postage price in the week if your interested